Residents of Washington, Michigan, welcome to Randazzo! We’re so happy you’ve found your way to us, so that we can be of service. We provide exceptional HVAC maintenance, repair and installation services to keep your home comfortable, year-round.
Trust the Washington, MI heating and cooling experts at Randazzo to meet your air conditioning and heating needs. Our expert, trained, and certified technicians are right around the corner whenever you need us. With over 30 years’ experience serving Washington, Michigan, and the surrounding areas, it’s likely many of your neighbors are already familiar with our team. Here, we detail how we can help assist with repairing your electric, water heater and heating and cooling systems in Washington, MI.
Heating and Cooling, Washington MI: Maintenance, Repair and Installation
We’re known for serving the community with HVAC repair in Washington, but we also spend much of our time ensuring your continued comfort with maintenance checks, and upgrading residences with new HVAC installations.
Air Conditioning Services, Washington
Our air conditioning technicians will work hard to keep your trusted AC running to the best of its ability with maintenance checks, and can stop by for repairs whenever they’re required. In need of a new AC system? We’re here to help you keep cool no matter what, with air conditioning services in Washington.
Heating Services, Washington
When the cold Michigan winter approaches, our first thought turns to the comfort of our local families in Washington and beyond. We’re here to ensure you stay warm through the long winter months, with furnace cleanings, inspections, maintenance, repairs and installations. We even offer 24-hour emergency heating services.
Furnace and AC Installation
If you’d like to upgrade to a new air conditioner or furnace, Randazzo has you covered. As the largest certified Lennox dealer located near Washington Township, we can offer you high quality equipment with a great warranty, at the lowest cost around. We strive to be the best heating and cooling company near the Washington Township area!
Water Heater Repair Washington, MI
Your hot water heater is essential, and we don’t want any of our neighbors to go without. Our water heater repair services are affordable and professional. With many parts stored in our trucks, chances are, we may be able to complete your repair there and then.
Electrician, Washington MI
Our exceptional electricians are here to serve you, Washington families. Whether you need us to install an automatic standby generator or complete lighting, fan or circuit repairs, our trusted team is here for you. Led by out master electrician, our team can offer you efficient, affordable repairs and peace of mind.
Local, Family Owned Heating and Cooling Contractor
At Randazzo, we believe in the personal touch. Located just outside of Washington Township, Michigan, we’re a family-owned furnace and air conditioner service company. Everyone here at Randazzo, from the President to the Janitor, lives and works nearby. For quality service you can trust, go with the name you know: Randazzo.
Request Your Free Quote
We’re proud to be a local HVAC company, offering home services for your heating and air conditioning, water heater and electric. When you choose to work with Randazzo, you receive exceptional customer service from our skilled technicians.
Our headquarters, on Quadrate Drive in Macomb, is just a 15-minute drive from Washington, Michigan. We’re the friendly neighbor you can count on to make your comfort our priority.
Contact us today to request your free quote, and enjoy the peace of mind that comes with working with a fully insured, certified, professional and local team.
Recent Jobs and Reviews in Washington, MI
Job Locations and Reviews
Completed full HVAC system installation including a 90,000 BTU furnace and 3.5-ton air conditioning unit. The furnace was installed in the basement utility area with proper PVC condensate drainage system, venting, and electrical connections, while the Lennox condenser unit was positioned on a pad against the exterior brick wall with refrigerant line set and disconnect box properly mounted. All mechanical and electrical permits were obtained, system was reconnected and tested for proper operation, and utility rebate documentation was processed.
Completed full HVAC system installation including a 70,000 BTU furnace and 2.5-ton air conditioning unit in basement location with left-side configuration. Installed outdoor condenser unit on concrete pad adjacent to building exterior with copper refrigerant lines wrapped in foam insulation and PVC condensate drain line routed along brick wall. Reconnected all electrical connections and completed mechanical hookups per specifications. Requested and coordinated mechanical and electrical permits for the installation. Set up utility rebate processing documentation for DTE and SEMCO Energy programs.
Completed annual cooling maintenance on residential split system. Unit exterior was heavily clogged with debris, dust, and fibrous material restricting airflow through condenser coils. Cleaned condenser coil and housing thoroughly to restore proper ventilation and heat exchange efficiency. Performed electrical diagnostics using digital multimeter, verifying system voltage and amperage readings within manufacturer specifications at 82.12 reading. Inspected all electrical connections and wiring harness inside unit compartment. System operational and running efficiently after cleaning and testing procedures completed.
Conducted on-site evaluation for complete HVAC system replacement at residential property with 16-year-old equipment. Assessed non-operational air conditioning condenser unit located on exterior pad adjacent to brick foundation and 90% efficiency natural gas furnace in basement. Documented existing equipment configuration, electrical service connections, and installation requirements for proposed replacement system.
Provided comprehensive estimate for tankless water heater replacement to upgrade 15-year-old conventional tank-style unit located in basement utility area. Assessed existing natural gas-fired water heater installation, including current venting configuration through metallic ductwork, copper supply line connections, and proximity to existing sump pump system. Evaluated basement infrastructure including exposed ceiling joists, existing gas line accessibility, electrical requirements for tankless unit operation, and adequate clearances for new equipment installation and proper combustion air supply.
Responded to callback regarding oil residue on brick paver patio from previous condenser removal. Procured cleaning supplies and successfully removed oil stains from pavers. Verified proper installation of 70,000 BTU furnace, 2.5-ton rear-discharge air conditioning system, humidifier, and all reconnections. Confirmed A/C service disconnect box and condensate drain line properly mounted to exterior brick wall per code requirements.
Conducted full system estimate for replacement of 16-year-old Concord furnace and matching air conditioning unit. Evaluated existing equipment in basement utility room, documented current system configuration including ductwork connections, venting arrangement, and electrical setup. Customer requested quote for complete HVAC system replacement under promotional offer, with installation desired within the next couple weeks.
Completed annual cooling maintenance on Lennox residential air conditioning system. Performed comprehensive inspection of outdoor condenser unit, verified proper operation of all components, documented equipment condition with photos, and confirmed unit is functioning within normal parameters. System showing typical wear consistent with age but maintaining structural integrity and operational efficiency.
Completed comprehensive HVAC system estimate for full system replacement in basement location. Evaluated existing 10-15 year old natural gas furnace and air conditioning system, both currently operational but approaching end of serviceable life. Performed thorough assessment of stacked furnace and air handler configuration, inspecting internal components including blower motor, circuit boards, wiring harness, and control systems. Documented existing PVC condensate drain line routing and ductwork connections including curved metal plenum attachment. Evaluated utility room access, clearances, and installation requirements for new equipment. Photographed current system configuration showing furnace with upper evaporator coil cabinet, exposed basement installation with unfinished walls and concrete flooring. Assessed existing infrastructure including electrical service, gas supply line, condensate drainage system, and supply/return ductwork compatibility. Provided equipment recommendations
Completed full HVAC system installation including a 135,000 BTU gas furnace and 5-ton air conditioning unit with right-side configuration in basement mechanical room. Installed all necessary refrigerant lines, PVC venting system, condensate drainage, and electrical connections per code requirements. Connected outdoor condensing unit to brick exterior wall with proper line set routing and secured all ductwork connections to existing distribution system.
Successfully installed a 50-gallon Bradford White power vent water heater in the basement utility area. The installation included proper copper piping connections, PVC venting, safety valves, and placement on a metal drip pan per code requirements. All mechanical and electrical connections were completed, and the unit was tested for proper operation.
Completed annual preventive maintenance on residential split system air conditioning unit. Performed comprehensive inspection of outdoor condensing unit, verified proper operation of compressor and condenser fan motor, checked refrigerant levels and electrical connections, cleaned condenser coils, and confirmed unit is operating within manufacturer specifications for the upcoming cooling season.
Performed routine maintenance on air conditioning system. Measured supply air temperature at 83.5°F and verified static pressure reading of +5.8 inches water column. Inspected attic-mounted equipment, ductwork, refrigerant lines, and condensate drain system with all components found operating within normal parameters.
Responded to no-heat call on 2021 furnace system. Upon inspection, diagnosed electrical control board failure preventing unit operation. Inspected all wiring connections, terminal blocks, and control board components within furnace cabinet. Replaced defective control board and verified proper electrical connections throughout system. Tested furnace operation through complete heating cycle, confirming ignition sequence, blower motor function, and proper heat output restored.
Completed ComfortGuard Maintenance Package on residential outdoor condensing unit. Performed specialty service addressing spotted filter and condenser pad, ensuring unit was properly positioned on base pad and all components were functioning within manufacturer specifications.
Completed annual HVAC maintenance on two outdoor air conditioning units. Replaced heavily soiled air filters on both units, which showed significant accumulation of dirt, dust, and debris affecting airflow efficiency. Cleaned condenser pads and removed organic debris from surrounding areas to ensure proper drainage and unit operation.
Performed comprehensive air conditioning maintenance callback to address customer concerns with previous service. Completed thorough system evaluation including electrical testing, refrigerant line inspection, and condenser unit assessment. Unit found operating properly with all components functioning within normal parameters. Took detailed documentation photos for service records.
Successfully installed a 20kW 200-amp automatic transfer switch generator system, including all necessary electrical connections, transfer switch integration, gas piping, and pressure testing. All required permits were obtained for mechanical, electrical, generator, gas pipe, pressure test, and transfer switch components. The installation included mounting exterior electrical components with proper conduit routing along the building's brick exterior, and installing the automatic transfer switch panel in the interior utility space with appropriate safety labeling and inspection approvals.
Provided comprehensive estimate for complete HVAC system replacement including natural gas furnace located in basement and outdoor air conditioning condensing unit. Current 10-year-old equipment operational but nearing end of service life. Evaluated existing installation including ductwork connections, PVC condensate drainage, electrical service, and outdoor unit placement on concrete pad with refrigerant lines and conduit routed along exterior brick wall.
Responded to urgent service call for 4-month-old furnace system located in basement. Performed diagnostic evaluation using wireless 4-port manifold and micron gauge to assess refrigerant levels, pressures, and system vacuum conditions. Completed necessary measurements and testing to verify proper system operation under both part and labor warranty coverage.
