HVAC Services & Electricians in Ypsilanti, MI

Conducted comprehensive assessment of existing 15-year-old HVAC system for full replacement estimate in colonial-style residence with forced air heating and cooling. Evaluated York natural gas furnace located in basement mechanical room and exterior air conditioning unit positioned on decorative stone bed against brick foundation. System assessment included examination of existing ductwork configuration, PVC venting infrastructure, electrical connections, and overall equipment condition to determine specifications for complete furnace and air conditioning replacement. Documented current equipment placement, utility connections, and installation parameters to provide accurate pricing for new system installation.

Completed full HVAC system installation for a medium-sized residential property (1200-2000 sq.ft.) including natural gas furnace with air conditioning. Indoor equipment installed in closet utility space features new furnace unit with TRION Max 5 air filtration system, configured ductwork with proper connections and routing, and all necessary electrical wiring. Outdoor condensing unit installed on concrete pad against exterior wall with appropriate electrical disconnect, refrigerant line connections, and conduit runs through siding. System tested and operational for both heating and cooling functions.

Completed electrical estimate for residential electric vehicle charging station installation. Assessed existing electrical infrastructure including main service panel location, available circuit capacity at utility meter, and optimal routing path from electrical panel through utility room to proposed charging station location in garage or exterior wall area. Customer confirmed current vehicle ownership requiring Level 2 charging capability.

Completed comprehensive Air Handler Maintenance (AHM) and Air Conditioner Maintenance (ACM) service under active RAC membership coverage. Performed thorough inspection of all internal HVAC components including blower motor assembly, gas valve connections, control board, and electrical wiring harnesses. Replaced furnace filters and humidifier pad as scheduled preventive maintenance items. Verified proper operation of all mechanical and electrical systems, including refrigerant lines, motor connections, and control circuitry. All components found in satisfactory working condition with normal operational dust accumulation. System operating within manufacturer specifications.

Returned to address code violation requiring auxiliary and secondary drain systems on evaporator coil per 2015 MRC requirements. Installed secondary drain line with proper termination and secured all PVC condensate piping to newly installed 90,000 BTU furnace and 3-ton air conditioning system. Verified all drain connections, tested condensate flow, and confirmed compliance with mechanical permit specifications for furnace, AC unit, and humidifier reconnection.

Responded to no cooling complaint on 4-year-old system. Customer reported lawn care crew damaged wiring, resulting in loss of cooling function while heating remained operational. Upon inspection, located severed low-voltage control wire running from outdoor condensing unit to indoor air handler. Repaired damaged conductor, verified proper voltage at thermostat and equipment terminals, and restored system to full cooling operation. Tested both heating and cooling modes to confirm complete functionality.

Conducted on-site assessment for whole home generator installation at a 1990s-era residence. Evaluated existing electrical infrastructure, including main service panel location in basement utility area. Documented current electrical panel configuration with dual rows of circuit breakers and incoming service conductors. Assessed available space and utility access points for generator placement and necessary electrical connections. Photographed electrical panel and utility room conditions to determine load requirements and transfer switch installation location. Provided comprehensive estimate for complete generator system installation including equipment options, transfer switch, gas line connection requirements, and electrical integration with existing service panel.

Completed routine Air Care Cooling maintenance on residential outdoor condensing unit. Performed visual inspection of condenser coil, noting light to moderate dust and debris accumulation on fin surfaces, which is typical for normal operation. Fan assembly and cabinet exterior found in acceptable working condition with no immediate service concerns identified.

Completed routine HVAC maintenance on gas furnace unit as part of recurring Air Care Heating service agreement. Performed comprehensive inspection of all internal components including gas valve assembly, inducer motor, heat exchanger tubes, blower motors, electrical connections, and venting system. Documented existing condition of unit with interior access panel removed, verifying proper wire routing and connections throughout all colored wiring harnesses. All mechanical and electrical components found operational at time of inspection.

Responded to no-cooling call on 2006 outdoor condensing unit. Upon inspection, found failed dual-run capacitor with visible corrosion on electrical disconnect terminal. Performed electrical diagnostics confirming capacitor failure preventing compressor and condenser fan operation. Replaced defective capacitor, cleaned corroded electrical connections at disconnect, and verified proper voltage and amperage readings. System tested and operating within manufacturer specifications upon departure.

Completed routine maintenance on Lennox outdoor air conditioning condenser unit. Performed standard ACM procedures including inspection of unit components, cleaning of condenser coils, verification of proper operation, and assessment of concrete pad condition which showed weathering and algae growth along edges. Unit found to be in functional condition with all components operating within normal parameters.

Conducted electrical site assessment for installation of NACS-compatible electric vehicle charging station in basement location. Evaluated existing electrical infrastructure, panel capacity, and optimal routing path for dedicated circuit through exposed joist space alongside existing ductwork. Provided estimate for charging station installation to accommodate future electric vehicle purchase.

Completed annual cooling maintenance on residential air conditioning system. Performed comprehensive inspection of outdoor condensing unit, including visual examination of capacitor showing age-related corrosion and oxidation on terminals, contactor assembly with multiple wire connections, and electrical components within unit housing. All wiring connections, terminal screws, and internal contacts were inspected for proper operation and safety compliance.

Provided comprehensive estimate for replacement of existing HVAC system including 10-year-old natural gas furnace, 30-year-old air conditioning unit, and 15-year-old water heater, all located on main level. Assessment included evaluation of existing ductwork system showing signs of age and dust accumulation, as well as inspection of exterior electrical service panel and dual meter configuration to determine electrical capacity requirements for new equipment installation. Estimate encompasses necessary electrical upgrades to support modern high-efficiency equipment replacement.

Completed annual cooling maintenance on residential AC condenser unit, including inspection of outdoor equipment and replacement of MERV 8 air filter at 15% capacity. Provided customer instruction on proper filter removal procedure for future maintenance.

Completed annual cooling maintenance on residential split system air conditioning unit. Performed comprehensive inspection of outdoor condenser unit, checked electrical connections and conduit, tested fan motor operation, and verified proper system function. Unit showed signs of weathering and exterior deterioration but all mechanical components operating within normal parameters at time of service.

Completed scheduled air conditioning maintenance on Carrier system. Verified thermostat operation showing 68°F indoor temperature with 39% humidity and proper communication with HVAC unit. Inspected internal mechanical components, blower assembly, and refrigerant connections for proper operation and wear patterns.

Completed annual cooling maintenance on HVAC system, performing comprehensive inspection and testing of all components. Verified electrical measurements using multimeter, reading 0.608 on control circuits, and inspected blower wheel assembly and motor operation. All system components found operating within normal parameters with no deficiencies noted.

Completed installation of 70,000 BTU Lennox furnace unit in utility room. Reconnected all necessary ductwork, installed PVC venting system, and positioned unit on protective drain pan. All mechanical connections, electrical hookups, and safety controls were properly installed and tested to ensure proper operation per manufacturer specifications and local code requirements.

Completed full HVAC system installation including a 90,000 BTU furnace and 3-ton air conditioning unit in basement location. Installation included proper refrigerant line routing with copper piping, white PVC condensate drainage system, venting configuration, humidifier integration, and reconnection of all necessary utilities. All equipment mounted on appropriate base pad, permits obtained, mechanical components properly secured, and system tested for operational functionality per manufacturer specifications.