Heating & Cooling in Waterford, MI

Successfully completed installation of new Lennox outdoor condensing unit and indoor evaporator coil system. Positioned exterior condenser on vibration-dampening pad against building foundation with proper clearances, connected refrigerant lines through wall penetration, and installed electrical disconnect boxes with appropriate conduit. Indoor evaporator coil was integrated with existing Carrier furnace in basement mechanical room, with refrigerant lines properly insulated and routed. Verified all electrical connections, tested refrigerant line integrity, and ensured proper drainage configuration. System startup completed with verification of proper operation and airflow.

Successfully installed a 20kW RCA standby generator with a 100-amp automatic transfer switch, including all necessary electrical connections, gas piping, and pressure testing to ensure system integrity. All required permits were obtained for mechanical, electrical, generator, gas pipe, pressure test, and transfer switch components prior to installation. The unit was mounted on an exterior concrete pad with proper conduit routing, gas meter integration, and electrical service connections completed to manufacturer specifications and local code requirements.

Conducted comprehensive site evaluation for full HVAC system replacement in residential basement installation. Assessed existing gray metal furnace/air handler unit with connected ductwork, water heater, and current AC system configuration to provide accurate equipment sizing and installation requirements. Documented existing equipment conditions, spatial constraints, ductwork connections, and utility access points through detailed photography to develop complete replacement system proposal for customer seeking installation within the next couple weeks.

Responded to warranty callback for power issues following initial electrical installation. Upon inspection, identified faulty neutral connection at the meter base, with evidence of corrosion and oxidation on service entrance conductors and terminal connections. Documented existing conditions showing deteriorated grounding connections and weathered exterior service equipment requiring immediate attention to restore proper electrical service and ensure system safety.

Responded to callback for HVAC installation. Performed electrical inspection of main service panel and exterior disconnect box. Documented existing electrical infrastructure including circuit breaker configuration, conductor routing, bus bar connections, and grounding system. Verified electrical service entrance components and weatherhead connections. Inspected outdoor electrical enclosure showing age-related weathering and corrosion on terminals and hardware. Captured photographic documentation of both interior panel wiring arrangement and exterior service entrance for installation records and future reference.

Completed full HVAC system installation including a 70,000 BTU furnace and 2-ton air conditioning unit with right-side placement. Installed new air handler in basement utility space with associated PVC condensate drainage system, insulated refrigerant lines, and electrical conduit connections. Positioned outdoor condensing unit on pad adjacent to building exterior with proper service clearances and reconnected all refrigerant lines and electrical service. Obtained mechanical and electrical permits prior to installation. Configured complete ductwork integration including plenum transitions and verified all system connections. Submitted completion certificate documentation and finalized all required paperwork for energy efficiency program compliance.

Completed installation of 40-gallon residential tanked water heater in utility room with proper plumbing connections and venting. Mechanical and electrical permits were obtained prior to installation, with reconnection of water supply lines and power completed per code requirements. Unit was tested for proper operation and all safety labels verified in place.

Responded to emergency call for leaking water heater requiring immediate replacement. Conducted on-site assessment of existing white cylindrical water heater installation in basement utility area. Documented current configuration including copper supply lines, black pipe connections with blue ball valve, existing electrical connections, and proximity to HVAC ductwork and electrical panel. Photographed equipment condition, plumbing connections, and surrounding mechanical systems to prepare comprehensive replacement estimate for failed water heater unit.

Conducted on-site evaluation and provided replacement estimate for 25-year-old residential air conditioning system that has reached end of serviceable life. Assessed existing HVAC equipment located in utility closet, documented current system configuration including ductwork connections and electrical service, and reviewed financing options with homeowner for expedited replacement installation.

Completed full HVAC system installation including a 90,000 BTU furnace and 2.5 ton air conditioning unit with rear discharge configuration. Secured all required mechanical and electrical permits prior to installation. Installed new furnace on platform base with proper venting using PVC piping, connected condensate drainage system with flexible corrugated hose, and mounted air handler with metal plenum and flexible aluminum ductwork. Reconnected all electrical and mechanical components to existing systems, verified proper airflow and unit operation, and completed final system testing to ensure optimal performance.

Provided estimate for replacement of 25-year-old furnace and air conditioning system located in basement. Current natural gas furnace and AC unit are operational but have reached end of expected service life. Evaluated existing electrical panel, ductwork connections, and mechanical room layout to determine equipment specifications and installation requirements for new HVAC system.

Completed estimate for replacement of 28-year-old split system furnace and air conditioning unit at single-family residence. Assessed existing outdoor condensing unit and indoor electrical infrastructure to determine equipment specifications and installation requirements for proposed HVAC system replacement under promotional offer.

Conducted comprehensive evaluation of 26-year-old air conditioning system experiencing intermittent shutdown issues. Inspected existing Carrier furnace and AC installation in basement utility area, documenting extensive dust accumulation on ductwork, air handler components, and equipment surfaces. Assessed condition of flexible aluminum ductwork, gas line connections, and overall system infrastructure. Photographed existing HVAC configuration including main supply ducts, return air pathways, and equipment positioning for replacement planning purposes. Provided detailed estimate for complete AC system replacement due to age-related equipment failure and diminished reliability of current unit.

Completed full HVAC system installation including a Lennox 70,000 BTU furnace and 2-ton air conditioning unit positioned on the right side of the property. Installed all necessary ductwork, venting with white PVC piping, electrical connections with blue conduit, and refrigerant lines. All mechanical and electrical permits obtained, equipment properly mounted and secured in basement location, system tested and operational upon completion.

Responded to no-cooling call on 10-year-old central air conditioning system. Upon inspection, found outdoor condensing unit with significant corrosion and rust on dual run capacitor and electrical connections. Removed access panel and discovered debris accumulation inside unit compartment including leaves and organic material. Tested capacitor with multimeter and confirmed failure with readings outside manufacturer specifications. Cleaned debris from condenser unit interior and removed failed capacitor. Installed new dual run capacitor with proper MFD rating for compressor and condenser fan motor. Cleaned and tightened all electrical connections at contactor and capacitor terminals. Verified proper voltage at disconnect and tested contactor operation. Inspected refrigerant lines and coil for damage - copper tubing showed normal wear but no leaks detected. Energized system and confirmed compressor and condenser fan motor startup. Measured amp draw on both motors within normal operati

Responded to callback for water leakage at furnace exhaust penetration point. Inspected 90,000 BTU furnace and 3-ton air conditioning system installation in basement, focusing on PVC exhaust venting where it exits through exterior wall. Examined condensate drainage routing, PVC pipe joints, and penetration sealing to identify source of interior water intrusion and made necessary corrections to prevent further leakage.

Completed full HVAC system installation including a 90,000 BTU furnace and 3-ton air conditioning unit with rear discharge configuration. Obtained mechanical and electrical permits prior to installation. Installed new furnace in basement utility area with proper PVC venting and ductwork connections. Mounted outdoor condenser unit at exterior brick wall corner with appropriate electrical disconnect box and conduit routing. Reconnected all necessary utilities and verified system operation upon completion.

# HVAC System Replacement Estimate Conducted comprehensive assessment of existing 20-year-old residential HVAC system including furnace and air conditioning unit requiring immediate replacement. Documented current equipment conditions through detailed photography of evaporator coil assembly in attic space showing moisture accumulation and condensation patterns, as well as basement furnace installation with attached humidifier unit exhibiting visible wear, dust accumulation, and age-related deterioration. Prepared detailed replacement quote for new two-way furnace and air conditioning system to address failed equipment and restore reliable climate control to residential property.

Conducted inspection of 20-year-old AC system for replacement estimate as requested by homeowner. Documented existing installation in confined mechanical space, noting current condensate pump configuration and ventilation ducting. System has reached end of service life and replacement options were evaluated based on site conditions.

Conducted comprehensive evaluation of 16-year-old HVAC system including furnace and air conditioning unit. Documented existing galvanized metal furnace with attached humidifier, ductwork configuration, and drainage setup. Assessed outdoor unit placement constraints between fence and vegetation. Recommended full system replacement based on age and customer's desire for proactive replacement before failure occurs.