Welcome, New Baltimore neighbors, we’re proud to serve you! Randazzo is your trusted, insured and certified team working on HVAC, heating and cooling in New Baltimore, MI.
If you live in or near New Baltimore, it’s likely you’ve heard our name. We have been privileged to serve residents of this area since 1988, and have had the opportunity to work with many of our neighbors. In fact, your coastal community and all its history are just a 15-20 minute drive from our Macomb headquarters, on Quadrate Drive. We’re conveniently located to serve you, with HVAC maintenance, repair and installation as well as 24-hour emergency services.
HVAC Contractor Serving New Baltimore
As a reputable, licensed and insured HVAC contractor, we are experts in heating, ventilation and air conditioning. We ensure your home stays warm all winter long, even when the lakefront winds feel cold and icy. With AC maintenance and repair, we can also help you stay cool, calm and collected in an air-conditioned home, throughout the hot summer months. Year round, we can improve the air quality in your home, to sooth your allergies. At a glance, our services include:
- Furnace and AC cleanings, inspections and maintenance.
- Heating and air conditioning repairs.
- Furnace and AC replacements and installations.
We’re also Michigan’s largest award-winning Lennox Premier Dealer. We know the ins and outs of Lennox products, and can help you choose the right equipment for your home and lifestyle. We also have vast experience working on a wide range of HVAC equipment from top brands, and can repair your current heating and cooling system.
Water Heater Repair in New Baltimore
Access to hot water is essential, and no-one should be without the ability to wash their dishes or enjoy a hot shower at the end of the day.
We maintain, repair and install electric, solar, propane, and natural gas water heaters, recirculation systems, heat pumps, as well as high efficiency tank and tankless hot water heaters.
Electrician, New Baltimore
If you’re looking for an electrician in New Baltimore, go with the name you know, and choose Randazzo. Led by our master electrician, all our work meets their impeccably high standards. Our team is available to complete the following services and more:
- Automatic standby generator installations
- Panel upgrades
- Circuit upgrades and repair
Contact Us for Heating and Cooling in New Baltimore, MI
In need of a maintenance check, repair or new HVAC system? Contact us today and receive a free quote from our team. If you don’t need us just yet, bookmark this page or take down our number, so you know where to turn when an urgent issue arises.
We can’t wait to meet you and visit your home by Lake St. Clair’s Anchor Bay. Thank you for taking the time to learn more about our team!
Recent Jobs and Reviews in New Baltimore, MI
Job Locations and Reviews
Successfully completed installation of a 3-ton air conditioning system with matching evaporator coil in residential basement mechanical room. Installed new outdoor condensing unit on left side of property and connected refrigerant lines to new indoor evaporator coil mounted to existing furnace system. Ran copper refrigerant line set through basement, secured with proper mounting brackets and insulation. Connected electrical service to new equipment and verified proper voltage and amperage. Installed condensate drain line using PVC piping integrated with existing drainage system. Performed system startup, charged refrigerant to manufacturer specifications, and verified proper airflow through ductwork. Tested all safety controls, thermostat communication, and system cycling. System operating efficiently with proper temperature split and no refrigerant leaks detected. All work performed in accordance with mechanical and electrical permits obtained prior to installation.
Completed annual maintenance on outdoor air conditioning condenser unit. Performed system inspection, changed air filter, and documented equipment condition with photos showing unit operating on concrete pad against exterior wall with visible wear consistent with outdoor installation.
Conducted on-site evaluation for Generac standby generator installation at a residential property built in 2001. Assessed existing electrical panel configuration and available space in utility area for generator transfer switch installation. Documented current electrical service setup, including main breaker panel with dual rows of circuit breakers and existing disconnect switch. Photographed installation site conditions to determine equipment placement, conduit routing requirements, and necessary modifications to accommodate automatic transfer switch and generator connection.
Responded to service call for forced air furnace with humidifier pump cycling issue. Diagnosed and repaired humidity/water pump that was continuously turning on and off regardless of water level in reservoir. Performed seasonal AC tune-up including inspection of outdoor condenser unit, cleaned accumulated debris from exterior panels and base, checked refrigerant levels, and verified proper system operation. System restored to normal heating function with humidifier operating correctly on demand only.
Completed annual cooling maintenance on Luxaire outdoor condensing unit. Performed comprehensive system inspection, verified unit operation, and documented equipment condition with photos. Unit found in good working order with no significant issues noted.
Provided comprehensive replacement estimate for 22-year-old residential HVAC system including air conditioning condenser unit and natural gas furnace located in basement. Evaluated existing equipment which is currently operational but nearing end of service life, documented current system configuration with outdoor condenser positioned on concrete pad adjacent to brick foundation, and presented options for complete system replacement under BOGO promotion.
Completed full HVAC system installation including 70,000 BTU Lennox furnace and 2.5 ton air conditioning unit in residential basement utility area. Obtained mechanical and electrical permits prior to installation, installed new furnace and AC condenser unit in rear yard, connected all ductwork and refrigerant lines, and reconnected existing system components. All equipment tested and operational upon completion.
Completed annual preventive maintenance on Lennox residential air conditioning system. Performed comprehensive inspection of condenser unit, verified proper operation of fan motor and compressor, and documented equipment condition with photos showing coil assembly with normal dust accumulation for seasonal operation.
Completed full system HVAC estimate for medium-sized residential property (1200-2000 sq.ft.) requiring heating and cooling installation. Assessed existing closet-mounted furnace unit with extensive metallic ductwork system showing significant condensation accumulation on flexible aluminum ducts, indicating potential insulation deficiency or humidity control issues. Evaluated exterior electrical infrastructure including dual meter configuration and conduit system mounted on brick facade to ensure adequate power supply capacity for proposed natural gas or propane-fired heating and cooling equipment upgrade.
Provided estimate for replacement of 25-year-old natural gas furnace and water heater located in main level mechanical room. Current water heater is non-operational while furnace remains functional. Equipment is installed in confined utility closet with existing PVC venting and requires replacement due to age and water heater failure.
Performed annual cooling maintenance on residential outdoor condensing unit. Completed comprehensive system inspection, cleaned condenser coils and exterior surfaces showing weathering and discoloration, verified refrigerant lines and connections, tested fan motor operation, and confirmed unit operational status with all components functioning within normal parameters.
Completed annual cooling maintenance on residential outdoor condenser unit. Performed comprehensive system inspection, cleaned condenser coils and exterior surfaces to remove accumulated dirt and debris, checked refrigerant lines and electrical connections, and verified proper fan operation to ensure optimal system performance for the cooling season.
Provided estimate for complete air conditioning system replacement on residential property with existing 20-year-old unit that has reached end of service life. Assessed current basement mechanical room configuration, including existing furnace/air handler, ductwork connections, electrical service, and available space for new equipment installation. Documented existing HVAC system layout and captured measurements to ensure proper sizing and compatibility for replacement condenser and any necessary air handler modifications required for efficient operation.
# HVAC Service Call - Air Conditioning System Responded to service call for outdoor Amana air conditioning unit not cooling. Upon arrival, located condensing unit on concrete pad against exterior brick wall. Connected manifold gauge set to service ports to assess system pressures and diagnose cooling failure. Performed visual inspection of condensing unit exterior condition, checking for obvious signs of damage, debris blockage in coil fins, or electrical issues at disconnect. Verified power supply at adjacent electrical meter and disconnect box. Evaluated compressor operation and fan motor function during diagnostic testing. Measured refrigerant pressures on both high and low side of system using calibrated HVAC gauges to determine if system had adequate refrigerant charge or potential leak. Assessed temperature differential and system performance indicators to identify root cause of cooling deficiency. Equipment age noted as older with unknown service history, requiring thorough e
Provided estimate for replacement of 34-year-old residential air conditioning system that failed last year. Evaluated existing outdoor condenser unit on concrete pad and indoor air handler located in utility room off garage with natural gas furnace. Assessed current equipment configuration, ductwork connections, and installation requirements for new AC-only system replacement to restore cooling capacity to the home.
Completed annual cooling maintenance on residential AC system. Performed system diagnostics using manifold gauges, verified R410A refrigerant pressures and temperatures within manufacturer specifications, inspected condensing unit exterior condition, and documented equipment operation with pressure readings of 116.8 psi low side and 260.3 psi high side at 123°F ambient temperature.
Completed annual preventive maintenance on residential cooling system. Performed comprehensive inspection of HVAC equipment, ductwork connections, and associated mechanical components in utility area. Documented equipment condition through photography showing water heater, furnace unit, metallic ductwork, copper supply lines, and plumbing connections all in operational status with no immediate service needs identified.
Provided comprehensive estimate for air conditioning system replacement in basement location. Current 27-year-old unit remains operational but has exceeded typical service lifespan. Documented existing HVAC installation including ductwork configuration, equipment positioning within confined mechanical space, and associated plumbing systems. Assessed accessibility considerations for replacement work given equipment location in utility area with existing water heater and circulation pump assembly.
Performed routine Air Care Maintenance on residential cooling system. Inspected outdoor condensing unit, verified proper operation, and measured refrigerant pressures and temperatures using digital manifold gauges, confirming system performance within manufacturer specifications.
Completed annual cooling maintenance on residential split system air conditioning unit. Performed comprehensive inspection of outdoor condenser unit, noting moderate dirt and debris accumulation on exterior casing and coil surfaces. Cleaned condenser coils and exterior housing to restore proper airflow and heat transfer efficiency. Verified fan operation and inspected electrical connections. System operating within normal parameters upon completion of maintenance service.