Expert Heating and Cooling in Dearborn, MI

Completed annual heating and cooling maintenance on Lennox residential system. Performed comprehensive inspection of outdoor condenser unit, accessed internal components, inspected heat exchanger coils and fan assembly, and documented equipment condition with photos per maintenance protocol.

Provided estimate for new tankless water heater installation to replace existing non-functional 50-gallon standard natural draft unit in basement utility area. Assessed current plumbing configuration, venting requirements, and gas line capacity to determine specifications for tankless conversion. Documented existing Reliance water heater location, surrounding piping layout, and available space for proper tankless unit installation and code-compliant venting modifications.

Performed electrical maintenance on a 20kW Kohler residential standby generator. Identified required generator maintenance kit and documented unit condition through comprehensive photographic inspection of engine compartment and exterior installation.

Provided comprehensive estimate for water heater replacement options, including both standard tank and tankless configurations for new installation. Assessed existing non-functional Rheem Performance water heater showing significant water damage and deterioration at base, with visible staining on floor tiles indicating previous leakage issues. Documented current plumbing configuration including copper supply lines, shut-off valves, and venting requirements in unfinished basement utility space to determine optimal replacement solution and installation specifications.

Conducted comprehensive on-site assessment for complete HVAC system replacement in single-family residence under 800 square feet. Evaluated existing furnace and air conditioning equipment located in confined basement mechanical space, documenting current system configuration including ductwork routing, clearance constraints, and utility connections. Photographed installation area showing beige furnace unit with vertical exhaust venting, adjacent water heater with corroded piping, and silver metallic ductwork running through structural beams with limited clearance. Assessed mechanical room layout including plywood subflooring, electrical outlets, support columns, and tight workspace conditions that will impact equipment removal and new system installation. Prepared detailed estimate for expedited full system replacement including new furnace and air conditioning unit sized appropriately for square footage, accounting for existing ductwork integration and space limitations in mechanical

Completed annual cooling maintenance on Lennox air conditioning condenser unit. Performed thorough cleaning of exterior coils which had accumulated significant dirt, dust, and debris buildup. Replaced air filter and evaporator pad as part of routine ACM service, ensuring optimal system performance and airflow for the cooling season.

Completed scheduled preventative maintenance on residential HVAC system including both heating and cooling components. Performed comprehensive inspection of furnace interior, gas valve assembly, heat exchanger, blower motor, control board, and all electrical connections. Verified proper operation of safety controls, checked refrigerant lines for wear, confirmed wiring integrity throughout system, and documented equipment condition with interior photographs for maintenance records.

Responded to callback for air conditioning system not turning on following previous no-cool service call. Upon arrival, accessed control panel and performed electrical diagnostics using clamp meter to test capacitor functionality. Verified capacitor readings and inspected all wire connections within the electrical enclosure. Tested system operation and confirmed proper startup sequence. System restored to normal operation with all components functioning within manufacturer specifications.

Responded to service call for multiple non-functioning GFCI outlets on exterior and several interior outlets inoperative for approximately two weeks. Conducted comprehensive electrical troubleshooting beginning at main service panel. Inspected circuit breaker panel, verified all breakers properly seated and functioning, checked for tripped breakers or loose connections. Tested affected circuits using multimeter to identify power loss points. Traced GFCI circuit to determine if upstream device had tripped, affecting downstream outlets. Reset GFCI receptacles as needed and verified proper ground fault protection operation. Inspected exterior outlet boxes for moisture intrusion or weather-related damage that may have caused nuisance tripping. Tested all previously non-functional outlets, confirmed restoration of power and proper operation. Additionally performed complimentary air conditioning system inspection as requested, checking refrigerant levels, electrical connections, capacitor co

Provided estimate for complete HVAC system replacement including natural gas furnace and air conditioning unit for 30-year-old equipment located in basement mechanical room. Current air conditioning system non-operational while furnace remains functional. Assessed existing ductwork configuration, electrical disconnects, and outdoor condenser placement on decorative rock bed adjacent to home exterior with vinyl siding.

Conducted on-site assessment for Level 2 EV charger installation on exterior side of residence. Evaluated existing electrical infrastructure in basement mechanical space, including main service panel location, available breaker capacity, and optimal routing path for new 240V dedicated circuit. Documented current conditions of unfinished basement area with exposed ductwork and finished lower-level space to determine most efficient conduit run from electrical panel to proposed exterior charging station location. Provided recommendations for wire gauge, circuit breaker sizing, and installation methodology to meet NEC requirements for EV charging equipment.

Responded to callback for newly installed thermostat with furnace displaying alert code 11 on six-year-old forced air system. Performed diagnostic testing and temperature measurements at evaporator coil (15.18°F) and supply register (122.78°F) to verify system operation and rule out thermostat programming issues. Determined furnace alert code was equipment-related rather than thermostat installation error, cleared code, and confirmed system returned to normal heating operation with proper temperature differential.

Conducted on-site assessment for complete HVAC system replacement, evaluating existing furnace, air conditioning unit, and Bradford White water heater in residential mechanical room. Documented current equipment configuration including ductwork dimensions and layout, photographed existing installations, and prepared comprehensive replacement estimates for new furnace, AC system, and standard water heater per homeowner's request.

Completed scheduled Air Care Maintenance on residential HVAC system. Performed comprehensive inspection of outdoor condensing unit, noting accumulated debris and environmental buildup on top panel and filter surfaces. Documented unit condition showing operational mesh grilles and ventilation components in serviceable condition, with equipment properly positioned on concrete pad foundation with adequate clearance for airflow.

Responded to no cooling complaint on system that had previously frozen and thawed. Upon inspection, found electrical wiring issues at junction box requiring attention. Addressed wiring connections and components to restore proper system operation and prevent future freezing conditions.

Conducted on-site evaluation for complete air conditioning system replacement at residential property. Assessed existing outdoor condenser unit positioned on concrete pad adjacent to brick exterior, noting refrigerant lines and electrical connections. Inspected indoor Carrier furnace system and associated ductwork in basement mechanical room to ensure compatibility with proposed AC replacement. Documented current system configuration including PVC condensate drainage, refrigerant line routing, and electrical service. Provided comprehensive replacement estimate for new air conditioning system with priority scheduling for earliest available installation.

Provided estimate for furnace and air conditioning replacement system under BOGO promotion for 23-year-old equipment currently located in basement utility area. Existing HVAC system is operational but at end of service life, with air handler positioned in confined space with limited clearance beneath low ceiling. Equipment replacement quote prepared to address aging infrastructure and improve system efficiency.

Completed scheduled Air Care Maintenance on Lennox outdoor condensing unit. Performed comprehensive system inspection, verified proper operation of all components, and documented unit condition with photographic records. Unit found in good working order with normal outdoor weathering and minor dust accumulation on surfaces.

Performed comprehensive air conditioning maintenance tune-up on outdoor condensing unit. Verified proper amperage draw at 4.48 amps using digital clamp meter, indicating normal compressor operation. Inspected condenser coil fins, fan motor assembly, and refrigerant line connections; all components found in good working condition with no heating or furnace concerns reported.

Completed spring maintenance tune-up on a 4-year-old Lennox residential air conditioning system. Performed comprehensive inspection of all major components including inducer motor, gas valve assembly, electrical connections, condensate drainage system, and PVC venting. All systems tested and found operating within normal parameters with no repairs required.