Welcome! The Randazzo team is proud to provide HVAC services to the residents of Bloomfield Hills, MI. We are the name to trust for high-quality heating and cooling, electrical and water heater repair, maintenance, or installations.
Since 1988, our family has made it a point to treat your needs as our own. That’s why we only provide the finest products and workmanship with every HVAC service we offer in Bloomfield Hills.
Our team is only a short drive away in Macomb, so we’ll have our technicians to your door in no time. Located nearby Bloomfield Hills? We serve the entire Metro Detroit area, including the communities of Sterling Heights, Warren, Rochester Hills, and elsewhere.
Stay comfortable all year long with perfectly functioning HVAC systems in your Bloomfield Hills, MI home. From the cold, snow-filled winters to the hot, sunbaked summers, we have the solutions you need.
Find out more about our local team by reading on. We have the heating and cooling services Bloomfield Hills residents rely on, and we’ll also be there day or night for your electrical and water heater needs.
Furnace & Air Conditioning Services in Bloomfield Hills
Randazzo’s insured technicians have the skills and tools to handle any heating or cooling task. Whether you need AC repairs for your Bloomfield Hills, MI bungalow or heating system installation for your townhouse, we are your trusted partner to call.
Turn to our team for:
- Furnace and AC inspection, cleaning, and maintenance.
- Furnace and AC repairs.
- Furnace and AC installations.
Is it time to make an upgrade? We supply some of the best HVAC systems for Bloomfield Hills residents as Michigan’s largest award-winning Lennox Premier Dealer.
During our visit, we can also install state-of-the-art products that improve air quality, ridding it of toxins and limiting germs, bacteria, chemical odors, and vapors.
Licensed Electricians in Bloomfield Hills, MI
Our knowledgeable technicians are often called upon for electrical needs.
Randazzo is an experienced electrician in Bloomfield Hills, MI, with a full-service electrical team, led by our master electrician. We can help you with your new appliances that require panel or circuit upgrades. Our team also installs standby generators to keep your power on during the worst conditions.
Water Heater Repair & Installation in Bloomfield Hills, MI
Your heating and cooling systems in Bloomfield Hills, MI, are essential, but so is your hot water. You use this necessity to wash clothes, do the dishes, and take a hot shower.
If you need comprehensive water heater service in Bloomfield Hills, call Randazzo for the fix. Our water heater repair, installation, and maintenance services are always available so you don’t have to be without your hot water for long. We have experience working on a wide variety of hot water heaters including tankless, hybrid, electric, propane, solar and natural gas units. Our team can also service your recirculation systems and heat pumps.
Contact The HVAC Specialists & Electricians At Randazzo
Randazzo looks forward to meeting your HVAC, water heater and electrical needs. As HVAC specialists in Bloomfield Hills, MI, we are always willing to help our neighbors. We’d love to answer any questions you may have and schedule your next service visit. Call us at 586-336-1111 (toll free) for more information and contact us for a free estimate.
Recent Jobs and Reviews in Bloomfield Hills, MI
Job Locations and Reviews
Performed callback maintenance service on HVAC system. Rinsed condenser coils with hot water using customer-provided hose from garage to remove accumulated dirt, debris, and organic matter visible on coil fins. Updated maintenance charts in basement to reflect previously completed work including filter replacements, evaporator pad installations, and UV bulb changes. Collected payment for annual membership and components already installed during prior service visit.
Completed annual heating and cooling maintenance on residential HVAC system. Performed comprehensive inspection of gas furnace internal components including blower motor, burner assembly, electrical connections, and condensate drainage system. Serviced outdoor condenser unit, inspecting compressor operation, fan motor, refrigerant levels, and cleaning coils as needed. All equipment operating within normal parameters upon completion.
Completed annual cooling maintenance on residential split system air conditioning unit. Performed comprehensive inspection of outdoor condenser unit, assessed coil condition, verified proper operation of fan motor and compressor, and documented equipment status with photographs. No filter replacement required per service specifications.
Conducted comprehensive on-site evaluation for full HVAC system replacement of 16-year-old air conditioning unit. Assessed existing furnace, air handler, ductwork connections, and electrical infrastructure including dual panel configuration and associated wiring runs. Documented current system conditions, equipment specifications, and installation requirements through photographic documentation to provide accurate replacement estimate for immediate system upgrade.
Completed annual heating maintenance and tune-up on residential furnace system as part of preventative maintenance membership. Performed comprehensive inspection of furnace components including blower motor assembly, electrical connections, control board with LED indicators, gas line connections, and associated HVAC equipment including Trion HE 1400 air filtration system. Verified all wiring connections, tested control sequences, and confirmed proper operation of all system components with no issues found.
Completed full HVAC system installation including 4-ton air conditioning unit with evaporator coil and hot water heater replacement. Unit positioned at rear of property with electrical reconnection performed by licensed electrician. All copper refrigerant lines installed and brazed with proper insulation, gas piping connected to new water heater with code-compliant yellow-handle shutoff valve, and flue venting properly secured to existing ductwork. Mechanical and electrical permits obtained prior to installation. System tested and verified operational upon completion.
Performed annual coil maintenance on two outdoor HVAC condensing units. Both units exhibited heavy accumulation of dirt, leaves, and organic debris on heat exchanger coils and surrounding areas. Removed access panels to expose coil sections, thoroughly cleaned all finned coil surfaces to restore proper airflow and heat transfer efficiency, cleared debris from unit interiors and perimeters, and replaced air filters. Units restored to optimal operating condition.
Completed warranty callback to install proper 4-wire communication wiring for new HVAC system. Removed temporary 2-wire setup and ran new 4-conductor thermostat wire from air handler unit located in attic space to thermostat location. Verified proper communication between system components and confirmed 50.5-degree supply air temperature at unit. System now operating correctly with full communicating functionality as designed.
Provided estimate for complete air conditioning system replacement including outdoor condensing unit and indoor air handler/furnace. Existing 2007 system is non-operational and requires full replacement with new equipment, refrigerant lines, and associated components for basement-located indoor unit and exterior condensing unit installation.
Responded to communication failure between furnace and air conditioning unit on new installation. Accessed attic space through ceiling opening and ran new control wiring from furnace to outdoor AC unit to establish proper communication between systems. Routed wire through existing attic infrastructure alongside HVAC ductwork and secured appropriately. Verified system communication restored and both units operating correctly upon completion.
Completed annual furnace maintenance and tune-up on 10-year-old unit as part of membership program. Performed comprehensive system inspection, cleaned heavily soiled outdoor coil assembly showing significant accumulation of dirt, dust, and environmental debris between fins, and replaced extremely dirty air filter clogged with particulate matter and organic material. All components tested and operating within normal parameters following service.
Performed annual preventive maintenance on residential split system air conditioning unit. Inspected outdoor condenser unit, noting significant deterioration of protective mesh screening with multiple tears and holes requiring future replacement. Verified electrical operation with multimeter readings showing 432 volts. Documented equipment condition with photos showing weathered exterior components, discolored top panel with debris accumulation, and compromised protective covering that may allow debris intrusion affecting unit efficiency and longevity.
Responded to complaint of air conditioning unit not shutting off on 15-year-old system located on east side of property. Upon inspection, discovered severely corroded contactor and terminal connections with heavy rust and oxidation throughout the electrical assembly. The contactor showed extensive deterioration from prolonged moisture exposure, with corroded terminals, mounting hardware, and connection points. Despite the advanced corrosion, all wire connections remained intact and the system continued to provide adequate cooling. Identified the failed contactor as the root cause preventing the unit from cycling off properly. Checked out without work performed at customer's request to evaluate repair options given the age and condition of the unit.
Completed comprehensive tune-up maintenance on two furnace units and one air conditioning system, all approximately 8-9 years old and located in basement. Performed full system inspections including checking draft inducer motors, flame sensors, gas valve assemblies, heat exchangers, burner assemblies, and main control boards on both furnaces. Replaced air filters on both furnace units, installed new humidifier pads, and replaced UVC bulbs in both systems to maintain optimal indoor air quality and system efficiency. Verified thermostat operation and calibration, tested all electrical connections and wiring harnesses, and inspected heat exchanger fins for proper condition. All systems tested and confirmed operating within manufacturer specifications upon completion.
Completed scheduled ACM preventive maintenance on residential outdoor condensing unit. Performed comprehensive inspection of cylindrical unit including cleaning of bronze-colored mesh panels, verification of electrical connections at disconnect box, and assessment of refrigerant lines. Unit operational with all components functioning within normal parameters.
Performed scheduled air conditioning maintenance on residential cooling system. Conducted electrical measurements using digital clamp meter to verify proper amperage draw on compressor and system components, confirming unit operating within manufacturer specifications. All readings documented and system found to be functioning correctly with no deficiencies noted.
Conducted comprehensive site evaluation for air conditioning system replacement on 16-year-old unit paired with newer Lennox furnace. Assessed existing electrical infrastructure including main breaker panel, transfer switch, and service capacity to ensure compatibility with new AC installation. Documented current system configuration and utility room layout to prepare detailed full system replacement estimate for customer seeking equipment upgrade within current season.
Completed electrical panel estimate for basement panel replacement serving Units 16 and 18. Assessed existing dual-meter installation with individual digital utility meters mounted on wooden backing board, gray electrical panel box with circuit breakers, and metallic conduit connections between components. Documented current configuration through photographs to provide accurate scope of work for panel replacement project.
Performed routine maintenance on 38KW standby generator system. Conducted comprehensive inspection of unit components, verified proper operation of all systems, and documented equipment condition through photographic records.
Completed comprehensive air conditioning tune-up on outdoor condensing unit. Upon arrival, found evaporator coil fins heavily clogged with accumulated dirt, debris, and grime, significantly restricting airflow. Removed access panel, which showed substantial deterioration with large tear exposing internal components. Thoroughly cleaned condenser coils to restore proper heat transfer efficiency, removed debris from base and surrounding area, and verified system operation. Unit returned to optimal working condition with improved airflow and cooling capacity.
