Residents of Washington, Michigan, welcome to Randazzo! We’re so happy you’ve found your way to us, so that we can be of service. We provide exceptional HVAC maintenance, repair and installation services to keep your home comfortable, year-round.
Trust the Washington, MI heating and cooling experts at Randazzo to meet your air conditioning and heating needs. Our expert, trained, and certified technicians are right around the corner whenever you need us. With over 30 years’ experience serving Washington, Michigan, and the surrounding areas, it’s likely many of your neighbors are already familiar with our team. Here, we detail how we can help assist with repairing your electric, water heater and heating and cooling systems in Washington, MI.
Heating and Cooling, Washington MI: Maintenance, Repair and Installation
We’re known for serving the community with HVAC repair in Washington, but we also spend much of our time ensuring your continued comfort with maintenance checks, and upgrading residences with new HVAC installations.
Air Conditioning Services, Washington
Our air conditioning technicians will work hard to keep your trusted AC running to the best of its ability with maintenance checks, and can stop by for repairs whenever they’re required. In need of a new AC system? We’re here to help you keep cool no matter what, with air conditioning services in Washington.
Heating Services, Washington
When the cold Michigan winter approaches, our first thought turns to the comfort of our local families in Washington and beyond. We’re here to ensure you stay warm through the long winter months, with furnace cleanings, inspections, maintenance, repairs and installations. We even offer 24-hour emergency heating services.
Furnace and AC Installation
If you’d like to upgrade to a new air conditioner or furnace, Randazzo has you covered. As the largest certified Lennox dealer located near Washington Township, we can offer you high quality equipment with a great warranty, at the lowest cost around. We strive to be the best heating and cooling company near the Washington Township area!
Water Heater Repair Washington, MI
Your hot water heater is essential, and we don’t want any of our neighbors to go without. Our water heater repair services are affordable and professional. With many parts stored in our trucks, chances are, we may be able to complete your repair there and then.
Electrician, Washington MI
Our exceptional electricians are here to serve you, Washington families. Whether you need us to install an automatic standby generator or complete lighting, fan or circuit repairs, our trusted team is here for you. Led by out master electrician, our team can offer you efficient, affordable repairs and peace of mind.
Local, Family Owned Heating and Cooling Contractor
At Randazzo, we believe in the personal touch. Located just outside of Washington Township, Michigan, we’re a family-owned furnace and air conditioner service company. Everyone here at Randazzo, from the President to the Janitor, lives and works nearby. For quality service you can trust, go with the name you know: Randazzo.
Request Your Free Quote
We’re proud to be a local HVAC company, offering home services for your heating and air conditioning, water heater and electric. When you choose to work with Randazzo, you receive exceptional customer service from our skilled technicians.
Our headquarters, on Quadrate Drive in Macomb, is just a 15-minute drive from Washington, Michigan. We’re the friendly neighbor you can count on to make your comfort our priority.
Contact us today to request your free quote, and enjoy the peace of mind that comes with working with a fully insured, certified, professional and local team.
Recent Jobs and Reviews in Washington, MI
Job Locations and Reviews
# HVAC Maintenance - ACM Completed Performed comprehensive annual cooling maintenance on residential HVAC system. Replaced furnace filters and humidifier pad as part of scheduled maintenance protocol. Conducted thorough inspection of outdoor condensing unit, measuring capacitor performance with digital multimeter to verify proper electrical function and confirm readings within manufacturer specifications. Evaluated indoor air handler unit, utilizing clamp meter to measure amperage draw on blower motor and verify electrical consumption within normal operating parameters. Inspected all electrical connections, control wiring, and component operation. Verified proper airflow and system cycling. All components tested and found operating within acceptable ranges. System left in proper working condition with all access panels secured.
Conducted on-site evaluation for new whole home Kohler generator installation at manufactured home residence. Assessed existing electrical panel configuration, documented current circuit breaker layout and distribution system to determine compatibility and capacity requirements for generator integration. Evaluated panel condition, circuit directory organization, and available space for necessary electrical connections and transfer switch installation required for backup power system.
Completed annual furnace tune-up and maintenance inspection under air care membership coverage. Performed comprehensive system evaluation including gas valve operation check, blower motor inspection, electrical connection verification, and burner assembly assessment. All internal components including Honeywell gas valve, wiring harness, and blower assembly found in proper working condition with no immediate service needs identified.
Completed comprehensive Air Care Heating and Cooling maintenance on Bryant furnace system with integrated air handler. Performed thorough inspection of all internal components including draft inducer motor, ignition control board, burner assembly, and electrical connections. Verified proper operation of heating and cooling systems, checked refrigerant lines, condensate drainage system, and all safety controls. All components found operating within manufacturer specifications, system tested and confirmed ready for continued service.
Responded to recall service for recently installed 70,000 BTU furnace where control board was incorrectly running in defrost mode and air conditioning was operating instead of heating system. Diagnosed and corrected thermostat wiring issue that was causing improper system operation, verified furnace firing sequence and heat output, and reprogrammed thermostat settings per homeowner specifications.
Completed annual cooling maintenance on outdoor HVAC system. Cleared debris and accumulated leaves from around both units, inspected refrigerant lines and electrical conduit connections, and replaced air filters and evaporative cooler pads as requested. System tested and operating within normal parameters.
Completed annual cooling maintenance on residential air conditioning system. Inspected outdoor condenser unit, noting visible dirt accumulation and staining on cabinet exterior from environmental exposure and water runoff. Unit operational and positioned properly on concrete pad with adequate clearance for airflow.
Completed routine air conditioning maintenance on residential split system unit. Performed system diagnostics using refrigerant manifold gauges, measuring operating pressures on both high and low sides to verify proper refrigerant charge and system performance. All readings were within manufacturer specifications, indicating optimal system operation. No refrigerant adjustment or additional service required at this time.
Performed pressure test on commercial generator gas line installation using calibrated gauge equipment. Test assembly was connected to the blue service valve manifold at the building exterior, with gauge readings monitored to verify system integrity and confirm proper installation per code requirements. All connections held pressure within acceptable parameters, validating the gas line installation for safe generator operation.
Installed a new 50-gallon Bradford White tanked water heater with complete plumbing connections including copper supply and discharge piping. Installation included a Grundfos Comfort TGT recirculation pump with digital controls and status indicators, ball valves for system isolation, pressure relief valve, and proper electrical connections. All mechanical permits were obtained prior to installation, and the system was tested and verified operational upon completion.
Completed scheduled annual maintenance on residential air conditioning unit. Performed comprehensive system inspection and replaced dirty air filter with new pleated filter per manufacturer specifications. Verified proper airflow and system operation upon completion of maintenance service.
Completed comprehensive Air Care Heating and Cooling maintenance on AHC4/88-11 unit. Inspected evaporator coil assembly with diamond-pattern mesh filter, noting accumulated dust and debris requiring attention, and verified condensate drain line routing and functionality. Documented internal HVAC components including evaporator coil with horizontal fins, refrigerant lines, electrical connections with proper wire management, safety controls, and mounting hardware, confirming all systems operational and properly secured.
Completed scheduled tune-up and maintenance on dual HVAC condenser units. Performed comprehensive system inspection, verified proper operation of both units, cleaned condenser coils showing dirt and dust accumulation, checked refrigerant lines and insulation integrity, and confirmed system functionality. All components found operating within normal parameters with customer reporting satisfactory system performance prior to service.
Performed pressure test on HVAC system using calibrated gauge equipment with brass fittings and blue valve assembly. Test conducted on outdoor unit to verify system integrity, with pressure readings monitored and documented via gauge positioned at ground level near flexible metallic conduits and refrigerant lines. All connections secured and system confirmed operational within manufacturer specifications.
Performed gas pressure test on HVAC system using calibrated pressure gauge and testing equipment. Connected test gauge assembly with brass fittings to gas line and monitored pressure readings to verify system integrity and proper gas flow. Documented test results with photographic evidence showing gauge readings and equipment setup, confirming system passed pressure test requirements and is operating within acceptable parameters.
Responded to no-power call in 47-year-old residence where GFCI outlets and circuits had been non-functional for five days. Diagnosed and resolved electrical fault affecting bathroom/kitchen area circuits. Tested and reset GFCI protection devices, verified proper operation of all outlets and switches, restored power to affected areas, and confirmed all circuits functioning correctly with no ground faults present.
Responded to callback regarding recent furnace installation where air conditioning was running instead of heating system. Inspected thermostat wiring and control board connections to diagnose potential wiring error from original installation. Verified all terminal connections at furnace control board including R, W, Y, C, and G wires, documented existing wiring configuration with photos, and confirmed proper wire routing between thermostat and equipment. System had been shut down by occupant prior to arrival. Contacted homeowner remotely to report findings and discuss corrective action needed to resolve heating/cooling control issue.
Completed full HVAC system installation in basement utility area, including 90,000 BTU gas furnace and 3.5-ton air conditioning unit with left-side configuration. Installed new ductwork connections, PVC venting system, and electrical conduit to both units. Reconnected all necessary utility connections and verified proper system operation. Mechanical and electrical permits were obtained prior to installation. All equipment positioned on concrete floor with appropriate clearances maintained for service access and code compliance.
Installed a 50-gallon tanked water heater in basement utility area with complete reconnection of all plumbing and gas lines. Connected copper supply and discharge piping with appropriate shut-off valves, installed ICON System gas control unit with pilot assembly, and verified proper venting configuration. Permits requested for mechanical installation and hot water heater reconnection; unit tested and operational upon completion.
Completed annual cooling maintenance on residential HVAC system. Replaced air filter and evaporator pad as requested. Inspected and photographed water heater installation in utility area, noting proper Bradford White Defender unit operation with functional safety systems, appropriate copper piping connections, and adequate spray foam insulation throughout mechanical room.
