Heating and Cooling, New Baltimore, MI

Completed comprehensive ComfortGuard maintenance package on residential split HVAC system, including full inspection of gas furnace with blower assembly and outdoor condensing unit. Performed standard preventive maintenance procedures, verified proper operation of all mechanical and electrical components, and documented system condition with access panel removed for thorough internal assessment.

Completed annual cooling maintenance on Lennox XC14-048-230-07 outdoor condensing unit utilizing R-410A refrigerant. Performed comprehensive system inspection, documented equipment nameplate data and current operating condition, and verified unit functionality. Reminded customer to renew residential annual contract for continued maintenance coverage.

Completed full HVAC system installation including 90,000 BTU furnace and 3.5 ton air conditioning unit with rear discharge configuration in basement utility area. Obtained necessary mechanical and electrical permits prior to installation, performed all required connections and reconnections to existing infrastructure, and ensured proper integration with utility services for rebate processing eligibility.

Completed routine ACM maintenance on residential outdoor condenser unit. Thoroughly cleaned heavily soiled filter screens and coils that had accumulated significant dust and debris, restoring proper airflow to the system. Unit tested and operating within normal parameters upon completion.

Completed full installation of 3-ton air conditioning system with evaporator coil in basement mechanical room. Unit positioned on left side with proper electrical reconnection and mechanical hookup to existing Lennox furnace system. All required mechanical, electrical, and air conditioning permits secured prior to installation. System includes proper condensate drainage with PVC piping, white intake/exhaust venting through ceiling, and integrated ductwork connections to air handler. Installation verified operational with all safety labels and manufacturer specifications properly displayed on equipment.

Performed full system estimate on 23-year-old Bryant HVAC system in 2,100 sq ft two-story home with basement. Upon arrival, found furnace inducer motor completely locked up with failed bearings, blower motor actively leaking, run capacitor testing weak, and ignitor measuring above acceptable resistance specifications. Due to age of equipment (2003) and extent of multiple component failures, recommended complete system replacement rather than repair.

Responded to no heat call on 16-year-old forced air furnace that would run for one minute after reset button was pressed, then shut down. Diagnosed failed run capacitor using clamp meter, which showed capacitance reading of 0.067 microfarads, well below manufacturer specifications. Removed defective capacitor from blower assembly and replaced with new OEM-equivalent component. Tested system operation through multiple heating cycles to verify proper blower motor startup and continuous operation. System restored to full heating functionality.

Completed annual HVAC maintenance inspection on air handler unit. Contacted tenant prior to arrival to confirm access. Accessed internal components by removing front cabinet panel and performed comprehensive system evaluation. Inspected blower motor assembly, electrical connections, and wiring harnesses throughout multi-level cabinet configuration. Verified proper operation of all electrical components including circuit boards, relays, and control systems. Examined refrigerant lines and condensate drainage system. Documented equipment condition through photographic records showing organized wiring, properly mounted components, and operational status of all major systems.

Completed annual HVAC maintenance on outdoor air handling unit. Cleaned heavily soiled condenser coil that had accumulated significant dust, debris, and fiber buildup affecting heat transfer efficiency. Installed new MERV 16 filter and replaced equipment pad to ensure proper unit leveling and stability.

Completed annual preventive maintenance on Lennox split system air conditioning unit. Inspected outdoor condenser unit, indoor blower motor assembly, and electrical connections; verified proper operation of all components. System operating within normal parameters with no immediate service needs identified.

Provided comprehensive estimate for replacement of 30-year-old non-operational HVAC system consisting of basement-installed natural gas furnace and outdoor air conditioning unit. Assessed existing equipment configuration, utility connections, and installation requirements for complete system replacement. Documented current equipment condition and site specifications to develop accurate replacement proposal for both heating and cooling components.

Provided estimate for complete HVAC system installation including furnace and air conditioning unit to replace existing 45+ year old baseboard heating system. Equipment to be located in laundry room at rear of residence. Assessed utility closet containing water heater, expansion tank, and existing ductwork infrastructure. Evaluated space constraints and mechanical room layout to determine optimal placement for new forced-air heating and cooling equipment, including required modifications to accommodate ductwork distribution system throughout home.

Completed annual furnace maintenance and tune-up on 10-year-old unit with no reported issues. Performed comprehensive system diagnostics using digital clamp meter to verify electrical performance, measuring amperage draw on blower motor and other electrical components to ensure proper operation within manufacturer specifications. Inspected all internal components, wiring connections, and safety controls, confirming system is operating efficiently and safely for continued use.

Completed comprehensive preventative maintenance on residential air conditioning system per customer request. Performed full AC tune-up on outdoor condensing unit, including inspection of compressor, condenser coils, refrigerant lines, and electrical connections. Cleaned heavily soiled condenser coils and exterior surfaces which showed significant accumulation of dirt, dust, and environmental debris. Verified proper operation of fan motor and assessed copper refrigerant tubing and insulation condition. Checked electrical disconnect and power supply connections. System operating within normal parameters upon completion. Documentation captured showing unit condition before and after service. Recommended continued annual maintenance to ensure optimal performance and efficiency.

Completed annual cooling maintenance on residential outdoor condensing unit. Performed comprehensive system inspection, replaced air filter and evaporative pad, cleaned condenser coils, verified proper airflow through vertical fin assembly, and confirmed operational status of fan motor and compressor. Unit tested and operating within normal parameters with no deficiencies noted.

Provided comprehensive HVAC replacement estimate for 28-year-old non-operational air conditioning system and natural gas furnace located in basement. Assessed existing Lennox equipment, ductwork configuration, PVC condensate drainage system, and gas line connections. Documented current installation including metallic plenum, insulated piping, and equipment clearances to develop replacement recommendations.

Completed full HVAC system installation including a 770,000 BTU furnace and 3-ton air conditioning unit with right-side configuration. Installed new ductwork throughout basement area with proper routing through floor joists, connected copper refrigerant lines, and ran exterior PVC exhaust and intake venting through brick wall. Reconnected all electrical components, installed condensate drainage system, and verified proper airflow distribution through all branch ducts.

Completed routine maintenance inspection on residential gas furnace system. Accessed unit, inspected internal components including blower motor, gas valve assembly, flame sensor, ignition system, and electrical connections. All wiring harnesses, control modules, and safety devices verified in proper working condition with no visible signs of wear or deterioration. PVC condensate drain and vent piping inspected and confirmed secure. Unit operational and functioning within normal parameters.

Conducted on-site evaluation for complete HVAC system replacement of 22-year-old furnace and air conditioning unit. Assessed existing equipment configuration including ductwork, refrigerant lines, condensate drainage system, and electrical connections in basement mechanical room. Provided comprehensive replacement quote for new heating and cooling system to customer who is comparing multiple estimates before proceeding with installation.

Completed full HVAC system installation including a 70,000 BTU furnace and 2.5 ton air conditioning unit in basement utility area. Installed custom-fabricated sheet metal ductwork system with multiple rectangular transitions extending from floor to ceiling joists. Ran new dedicated electrical circuit to support equipment. Secured all necessary mechanical and electrical permits prior to installation. Routed PVC condensate drainage with proper wall mounting and brackets. All equipment installed per manufacturer specifications and local code requirements, with system tested and operational upon completion.