Clinton Township Service Overview
- Local Priority: Serving the Hall Road (M-59) corridor and neighborhoods near Partridge Creek every single day.
- Certified Expertise: Expert technicians who understand the distinct technical needs of Clinton Township’s varied home ages.
- Efficiency Focus: Specialized in high-efficiency systems that manage the specific climate demands of Macomb County.
“I was contacted by Randazzo for a maintenance check on my furnace that they installed. The service technician was professional and friendly. He answered my questions and even changed my furnace filter. Overall, I didn’t expect the call but it was much appreciated.”
Electrical Upgrades & Backup Power
Power demand in Clinton Township has increased significantly, especially in homes near the Partridge Creek area. Between modern appliances and EV chargers, older electrical panels often fall behind. We provide reliable solutions that keep your home running without interruption.
- Generator Installation: Authorized Generac and Kohler services.
- Panel Upgrades: Modernizing systems for today’s high-demand appliances.
- EV Charger Installation: Professional setups for home charging stations.
- Surge Protection: Whole-home protection against local grid spikes.
Furnace Repair & Heating System Work
Heating systems in neighborhoods tied to Chippewa Valley Schools take a heavy beating during Michigan winters. We often find that older furnaces lose efficiency over time, leading to higher energy bills and uneven heat. We correct these issues so your system runs reliably when you need it most.
- Heating Repair: Fast diagnostics for furnaces and heat pumps.
- System Replacement: Energy-efficient upgrades for older township homes.
- Seasonal Maintenance: Precision tuning to prevent winter breakdowns.
“Randazzo is my first choice for install and service. 25 years in my home and they have been there for me all along. Very professional and knowledgeable. On time and had my system running perfectly.”
Air Conditioning & Water Systems
Cooling in Clinton Township often comes down to airflow. Larger homes and finished basements require properly balanced systems to stay comfortable. Additionally, we specialize in sump pump services to protect your finished lower levels from the flooding risks common to our area.
- AC Troubleshooting: Solving uneven cooling and airflow issues.
- Sump Pump Service: Protecting basements with reliable backup systems.
- Water Heaters: Repairs and high-efficiency tankless upgrades.
Solving Clinton Township Home Issues
Problem: Residents near Hall Road often experience electrical panel tripping due to the high power demand of modern home technology.
Solution: We perform comprehensive panel upgrades and dedicated circuit installations to ensure your home can handle modern loads safely.
Problem: Homeowners frequently report that their furnace runs constantly but fails to provide even warmth in every room.
Solution: We recalibrate your heating system and seal ductwork to optimize airflow and lower your monthly energy expenses.
Problem: Finished basements in Clinton Township are at high risk of damage if the primary sump pump fails during a heavy rainstorm.
Solution: We install professional-grade battery backup pumps that automatically take over to keep your basement dry, even when the power is out.
“Everything went great and all is working as it should be. I am really impressed with the service and professionalism.”
Why Clinton Township Chooses Randazzo
We prioritize reliability over quick fixes, ensuring your home systems run without disruption.
- Local Experts: We understand the specific climate and home patterns across Macomb County.
- Fast Response: Our teams are already in Clinton Township and along Hall Road every day.
- Comprehensive Care: One trusted company for HVAC, electrical, and plumbing needs.
- Transparent Fixes: Technicians who explain the problem and the solution clearly.
Do you provide service near The Mall at Partridge Creek?
Can you help with an electrical panel upgrade?
Are your technicians certified for furnace repairs?
Recent Jobs and Reviews in Clinton Township, MI
Job Locations and Reviews
Completed scheduled Air Care Maintenance on residential air conditioning system. Performed thorough inspection of outdoor condenser unit, which showed significant accumulation of dirt, grime, and environmental debris on exterior panels and condenser coils. Cleaned condenser coil fins to remove dust and organic buildup, restoring proper airflow through the unit. Verified fan operation and checked unit for proper mechanical function. System operating within normal parameters upon completion of maintenance service.
Performed comprehensive air handler maintenance including inspection of blower motor assembly, electrical connections, and refrigerant lines. Verified all wire harnesses, control boards, and safety labels were properly secured and functioning. Unit tested and confirmed operational within manufacturer specifications.
Provided estimate for replacement of 15-year-old furnace and air conditioning system currently located in laundry room utility closet. Existing Armstrong furnace and associated ductwork evaluated for replacement specifications. Noted presence of mold or dark discoloration on structural beam near ductwork connection that may require remediation during installation.
Completed assessment and estimate for sump pump replacement in 43-year-old residential property. Inspected existing submersible sump pump system with floating switch mechanism located in circular ridged plastic basin. Documented deteriorating conditions including standing water accumulation, aged plumbing connections with multiple PVC and flexible drainage lines, and pump equipment showing signs of extended service life. Photographed entire sump pit assembly, discharge piping configuration, electrical wiring routing, and surrounding basement infrastructure to provide comprehensive documentation for replacement proposal.
Completed comprehensive tune-up on 14+ year old dual system located on main floor, servicing the primary unit in operation. Performed thorough inspection and maintenance of furnace and air conditioning components, including blower motor assembly, refrigerant lines, electrical connections, and gas piping. Inspected and serviced humidifier, thermostat, and hot water tank as requested, and replaced furnace filter and humidifier pad to ensure optimal system performance.
Completed annual heating maintenance on residential HVAC system. Performed comprehensive inspection of blower motor assembly, gas valve controls, electrical connections, and safety switches. Verified proper operation of all system components, checked wiring integrity throughout control board and junction box, and confirmed burner assembly functionality with no issues identified.
Completed comprehensive whole home electrical inspection of residential property. Evaluated original electrical service panel and breaker box, identifying several breakers with loose connections requiring attention and potential replacement. Inspected exterior meter installation, service entrance conductors, and associated conduit system mounted on brick exterior wall. Documented current electrical system conditions through photographic evidence for maintenance planning and safety compliance recommendations.
Completed annual heating and cooling maintenance service on residential HVAC system. Inspected furnace and air conditioning unit, checking all operational components and safety controls. Replaced dirty air filters with new pleated media filters, removing accumulated dust and debris to restore proper airflow and system efficiency. Verified equipment operation and confirmed system is functioning within normal parameters for continued heating and cooling performance.
Completed comprehensive 5-year ComfortGuard Maintenance service on outdoor HVAC condenser unit. Performed thorough inspection of condenser coils, fan assembly, and electrical connections. Cleaned exterior surfaces, verified proper refrigerant line connections, and confirmed unit operational status. All components functioning within normal parameters with no specialty repairs required.
Responded to service call for 4-month-old furnace system located in basement. Upon arrival, verified thermostat settings and measured supply air temperature at 35.6°F, indicating unit operating in cooling mode rather than heating. Adjusted Emerson thermostat from cooling to heating mode and confirmed proper system operation with appropriate temperature differential between supply and return air.
Completed annual preventative maintenance on residential air conditioning system. Performed system diagnostics using manifold gauges, inspected condenser unit operation, and replaced air filter. Unit tested and operating within normal parameters upon completion.
Successfully completed full HVAC system installation including a 70,000 BTU furnace and 2.5 ton air conditioning unit with rear discharge configuration. Installed new gas valve assembly with proper piping connections, completed all electrical wiring and control connections, and secured unit in designated utility closet space. All permits were obtained prior to installation, system was tested and reconnected to existing infrastructure, and installation meets manufacturer specifications and local mechanical code requirements.
Conducted comprehensive on-site evaluation for furnace replacement at residential property. Assessed existing 40-year-old heating system, documenting current equipment configuration including air handler unit, ductwork connections, refrigerant lines, and electrical components. Photographed mechanical room layout, existing furnace installation, filter access panels, blower assembly, and associated HVAC infrastructure to provide detailed replacement estimate and system specifications for aging heating equipment.
Responded to no-heat call on basement-located furnace less than 10 years old with thermostat set to 77°F but unit failing to initiate heating cycle. Performed diagnostic assessment of furnace components including temperature sensor testing, control board inspection, and thermostat signal verification. Examined internal wiring connections, terminal blocks, and electrical components for proper continuity and secure connections. Assessed venting system integrity and verified proper installation of exhaust components. Documented system conditions through diagnostic photography showing temperature probe readings and internal component configuration to identify cause of heating failure and restore proper furnace operation.
Performed annual maintenance on 10-year-old furnace unit operating properly at time of service. Conducted comprehensive tune-up including inspection of all major components. Removed and examined blower wheel assembly, verified proper mounting hub condition and spoke integrity. Inspected internal cabinet components including gas manifold, burner assembly, blower motor, electrical connections, and control modules. Verified all wire connections secure throughout system. Documented equipment condition with photographs. System tested and confirmed operational upon completion.
Completed annual furnace maintenance and tune-up on residential heating system. Performed comprehensive inspection of all internal components including blower motor assembly, gas valve connections, electrical wiring, and control board. Verified proper operation of ignition system and measured supply air temperature at 44°F, indicating unit was in cooling mode or standby during service. Inspected condensate drainage system with white PVC piping and vertical measurement tubes. Tested all electrical connections and safety controls to ensure proper function. All components found to be operating within normal parameters. Unit is functioning correctly and ready for continued service.
Completed annual heating maintenance on residential furnace system. Performed comprehensive tune-up including inspection of gas valve assembly, burner components, and heat exchanger. Verified proper operation of electronic control board and all electrical connections. Checked wiring integrity across all circuits including power, control, and safety connections. Inspected blower motor, capacitor, and associated mechanical components. All systems tested and confirmed operating within normal parameters. Unit currently functioning properly with no issues identified.
Returned to address recurring system issue from previous day's service call. Inspected analog Honeywell thermostat for proper operation and calibration. Performed diagnostic testing on ductwork system using digital measurement instrumentation to verify airflow and temperature differentials. Identified and resolved intermittent malfunction causing system to repeat previous failure condition.
Responded to service call for furnace not reaching desired temperature setpoint. Upon arrival, found thermostat displaying 69°F while set to 80°F, with unit experiencing delayed heating cycles. Performed diagnostic inspection of furnace electrical components and control system. Tested and serviced electrical switch assembly and related control circuitry to restore proper heating function and temperature regulation.