Clinton Township Service Overview
- Local Priority: Serving the Hall Road (M-59) corridor and neighborhoods near Partridge Creek every single day.
- Certified Expertise: Expert technicians who understand the distinct technical needs of Clinton Township’s varied home ages.
- Efficiency Focus: Specialized in high-efficiency systems that manage the specific climate demands of Macomb County.
“I was contacted by Randazzo for a maintenance check on my furnace that they installed. The service technician was professional and friendly. He answered my questions and even changed my furnace filter. Overall, I didn’t expect the call but it was much appreciated.”
Electrical Upgrades & Backup Power
Power demand in Clinton Township has increased significantly, especially in homes near the Partridge Creek area. Between modern appliances and EV chargers, older electrical panels often fall behind. We provide reliable solutions that keep your home running without interruption.
- Generator Installation: Authorized Generac and Kohler services.
- Panel Upgrades: Modernizing systems for today’s high-demand appliances.
- EV Charger Installation: Professional setups for home charging stations.
- Surge Protection: Whole-home protection against local grid spikes.
Furnace Repair & Heating System Work
Heating systems in neighborhoods tied to Chippewa Valley Schools take a heavy beating during Michigan winters. We often find that older furnaces lose efficiency over time, leading to higher energy bills and uneven heat. We correct these issues so your system runs reliably when you need it most.
- Heating Repair: Fast diagnostics for furnaces and heat pumps.
- System Replacement: Energy-efficient upgrades for older township homes.
- Seasonal Maintenance: Precision tuning to prevent winter breakdowns.
“Randazzo is my first choice for install and service. 25 years in my home and they have been there for me all along. Very professional and knowledgeable. On time and had my system running perfectly.”
Air Conditioning & Water Systems
Cooling in Clinton Township often comes down to airflow. Larger homes and finished basements require properly balanced systems to stay comfortable. Additionally, we specialize in sump pump services to protect your finished lower levels from the flooding risks common to our area.
- AC Troubleshooting: Solving uneven cooling and airflow issues.
- Sump Pump Service: Protecting basements with reliable backup systems.
- Water Heaters: Repairs and high-efficiency tankless upgrades.
Solving Clinton Township Home Issues
Problem: Residents near Hall Road often experience electrical panel tripping due to the high power demand of modern home technology.
Solution: We perform comprehensive panel upgrades and dedicated circuit installations to ensure your home can handle modern loads safely.
Problem: Homeowners frequently report that their furnace runs constantly but fails to provide even warmth in every room.
Solution: We recalibrate your heating system and seal ductwork to optimize airflow and lower your monthly energy expenses.
Problem: Finished basements in Clinton Township are at high risk of damage if the primary sump pump fails during a heavy rainstorm.
Solution: We install professional-grade battery backup pumps that automatically take over to keep your basement dry, even when the power is out.
“Everything went great and all is working as it should be. I am really impressed with the service and professionalism.”
Why Clinton Township Chooses Randazzo
We prioritize reliability over quick fixes, ensuring your home systems run without disruption.
- Local Experts: We understand the specific climate and home patterns across Macomb County.
- Fast Response: Our teams are already in Clinton Township and along Hall Road every day.
- Comprehensive Care: One trusted company for HVAC, electrical, and plumbing needs.
- Transparent Fixes: Technicians who explain the problem and the solution clearly.
Do you provide service near The Mall at Partridge Creek?
Can you help with an electrical panel upgrade?
Are your technicians certified for furnace repairs?
Recent Jobs and Reviews in Clinton Township, MI
Job Locations and Reviews
Completed full HVAC system installation including a 70,000 BTU downflow furnace and 2-ton air conditioning unit with rear discharge configuration. Installed new Lennox outdoor condenser unit on concrete pad with proper refrigerant line sets, electrical disconnect, condensate drainage, and PVC piping connections. Ran new dedicated electrical circuit to support system requirements and obtained mechanical and electrical permits prior to installation.
Conducted full system evaluation for 881 square foot townhouse condo with 15-year-old furnace and air conditioning system. Customer reported excessive airflow velocity, inadequate dehumidification due to short cycling, and incompatible aftermarket blower motor causing furnace overheat protection issues when adjusted. Inspected basement mechanical room installation including furnace cabinet, ductwork, and AC components. Documented ductwork expansion noise occurring at cycle termination. Assessed current equipment configuration with mismatched blower motor replacement limiting system adjustability. Photographed existing HVAC installation showing furnace unit with metallic ductwork, water heater, and basement utility area layout. Provided comprehensive replacement estimate for complete furnace and air conditioning system to address airflow control, humidity management, and equipment compatibility concerns in attached dwelling with limited exterior exposure.
Conducted site assessment and provided quote for Kohler standby generator installation at 45-year-old residential property. Evaluated existing electrical service panel configuration housed within custom cabinetry, documented current electrical infrastructure including breaker panels and available space for generator transfer switch integration. Photographed electrical service equipment and potential generator placement area to determine installation requirements and verify compatibility with existing electrical system.
Completed installation of 110,000 BTU high-efficiency furnace unit (model SLP99UH110XV8DCK-01) in basement mechanical room. Installed new furnace with metallic supply ductwork extending from unit plenum, properly secured all connections, and verified nameplate attachment on blower access panel. Obtained necessary mechanical permits prior to installation and documented completed work with site photographs showing furnace positioned adjacent to existing water heater with proper clearances maintained.
Completed installation of 2.5 ton air conditioning system with evaporator coil in rear-discharge configuration. Mounted new air handler unit in residential utility space with integrated electronic control module and LED diagnostics. Established dedicated electrical circuits at main panel for new HVAC equipment, completed all refrigerant line connections, and verified proper system operation upon startup.
Completed estimate for replacement of 17-year-old natural gas furnace and air conditioning system located in basement. Current equipment still operational but nearing end of service life. Assessed existing HVAC installation, ductwork configuration, electrical service capacity at breaker panel, and available space for new equipment placement. Provided comprehensive replacement quote for matched furnace and AC system under promotional offer.
Completed full HVAC system installation including a 70,000 BTU furnace and 2-ton air conditioning unit with left-side configuration. Installed furnace in basement location on concrete block base with proper ductwork connections, ran electrical conduit and exterior refrigerant lines along brick exterior wall to outdoor condensing unit, and reconnected all necessary utilities. All mechanical permits obtained and installation performed to code specifications with system tested and operational upon completion.
Completed comprehensive ComfortGuard maintenance package on gas furnace and air conditioning system. Performed thorough inspection of internal components including blower motor assembly, heat exchanger, burner assembly, and electrical control systems. Addressed customer concern regarding missing insulation on refrigerant lines inside unit by inspecting copper line set and documenting condition. Verified system pressures and temperatures using refrigerant manifold gauges, confirming proper refrigerant charge and system performance within manufacturer specifications.
Completed full HVAC system installation including a 70,000 BTU furnace and 2-ton air conditioning unit configured for left-side placement in basement utility area. Reconnected all existing gas lines, ductwork, and electrical connections to new equipment. All mechanical permits obtained and installation performed to code specifications with proper venting and drainage systems in place.
Installed a new M53-D submersible sump pump system with automatic float switch operation in existing basement sump basin. Connected discharge piping using white PVC with proper check valve installation to prevent backflow, secured all pipe connections with metal clamps, and verified vent hole placement for proper air circulation. Tested pump operation and float switch functionality to ensure automatic activation at appropriate water levels, confirmed proper drainage through discharge line, and left system fully operational with three-year manufacturer warranty coverage.
Completed annual cooling maintenance on residential split system air conditioning unit. Performed comprehensive inspection of outdoor condenser unit, verified proper operation of fan motor and compressor, checked refrigerant pressures and temperatures, and inspected electrical connections. Unit found to be operating within normal parameters with no immediate service concerns identified.
Completed scheduled maintenance on outdoor air handling condenser unit. Performed standard AHC maintenance protocol including inspection of exterior panels, coil surfaces, and mounting pad condition. Unit showed typical weathering and debris accumulation on exterior surfaces and coil fins from environmental exposure. Documented equipment condition with photos showing gravel bed installation, concrete pad, and protective mesh screening with age-appropriate wear patterns.
Completed ComfortGuard Maintenance Package including comprehensive system inspection and filter replacement. Conducted thorough assessment of reported drywall and potential mold concerns in affected areas, documenting conditions with photographic evidence of ceiling fixtures and interior spaces. Verified previous remediation work completed by homeowner and confirmed HVAC system operation within normal parameters.
Conducted comprehensive evaluation of 16-year-old residential air conditioning system experiencing refrigerant loss due to substantial leak, suspected to be located in evaporator coil. System utilizes R-22 refrigerant, which is obsolete and no longer manufactured. Documented existing outdoor condensing unit installation on exterior brick wall with proper electrical service and drainage. Assessed indoor furnace and air handler configuration in basement mechanical room, noting current ductwork, condensate drainage system, and overall HVAC infrastructure. Provided detailed estimate for complete air conditioning system replacement, excluding existing furnace, to address non-functional cooling system and upgrade to modern, environmentally-compliant refrigerant technology. Photographed current equipment placement and utility connections for replacement planning purposes.
Responded to emergency service call for carbon monoxide leak from existing 15-year-old Lennox furnace system. Conducted comprehensive assessment of current HVAC installation including furnace, ductwork, condensate drainage system, and associated mechanical components. Documented existing system configuration with detailed photography showing furnace unit, flexible metallic ductwork connections, copper refrigerant lines, PVC condensate drain piping, and electrical connections. Provided full system replacement estimate due to safety concerns and age of equipment requiring immediate replacement.
Completed annual preventative maintenance on Lennox outdoor condensing unit. Performed comprehensive inspection of condenser coils, electrical connections, and refrigerant levels. Unit found operating within normal parameters with no immediate service needs identified.
Completed comprehensive ComfortGuard preventative maintenance service on residential air conditioning system. Performed thorough inspection and cleaning of outdoor condenser unit, installed new concrete equipment pad for improved drainage and equipment stability, and replaced all four air filters throughout the HVAC system to ensure optimal airflow and indoor air quality. Unit tested and operating within normal parameters upon service completion.
Completed annual HVAC maintenance on Bryant outdoor condensing unit. Upon inspection, identified equipment requiring replacement, documented current condition with photographs, and advised customer of findings. Customer will proceed with unit replacement.
Responded to no-heat call for 2010 furnace located in basement. Upon inspection, diagnosed furnace failure and determined system was not operational. Performed diagnostic evaluation of all components including gas supply, electrical connections, and venting system to identify root cause of heating system malfunction.
Responded to water leak complaint from 4-year-old furnace located in basement. Upon inspection, identified condensate drain system issue causing water accumulation beneath unit. Cleared condensate drain line obstruction, verified proper drainage flow, and confirmed condensate pump operation. Inspected drain pan for cracks or damage, repositioned equipment leveling to ensure proper drainage pitch, and tested system operation through complete heating cycle to verify leak resolution.