Welcome, New Baltimore neighbors, we’re proud to serve you! Randazzo is your trusted, insured and certified team working on HVAC, heating and cooling in New Baltimore, MI.
If you live in or near New Baltimore, it’s likely you’ve heard our name. We have been privileged to serve residents of this area since 1988, and have had the opportunity to work with many of our neighbors. In fact, your coastal community and all its history are just a 15-20 minute drive from our Macomb headquarters, on Quadrate Drive. We’re conveniently located to serve you, with HVAC maintenance, repair and installation as well as 24-hour emergency services.
HVAC Contractor Serving New Baltimore
As a reputable, licensed and insured HVAC contractor, we are experts in heating, ventilation and air conditioning. We ensure your home stays warm all winter long, even when the lakefront winds feel cold and icy. With AC maintenance and repair, we can also help you stay cool, calm and collected in an air-conditioned home, throughout the hot summer months. Year round, we can improve the air quality in your home, to sooth your allergies. At a glance, our services include:
- Furnace and AC cleanings, inspections and maintenance.
- Heating and air conditioning repairs.
- Furnace and AC replacements and installations.
We’re also Michigan’s largest award-winning Lennox Premier Dealer. We know the ins and outs of Lennox products, and can help you choose the right equipment for your home and lifestyle. We also have vast experience working on a wide range of HVAC equipment from top brands, and can repair your current heating and cooling system.
Water Heater Repair in New Baltimore
Access to hot water is essential, and no-one should be without the ability to wash their dishes or enjoy a hot shower at the end of the day.
We maintain, repair and install electric, solar, propane, and natural gas water heaters, recirculation systems, heat pumps, as well as high efficiency tank and tankless hot water heaters.
Electrician, New Baltimore
If you’re looking for an electrician in New Baltimore, go with the name you know, and choose Randazzo. Led by our master electrician, all our work meets their impeccably high standards. Our team is available to complete the following services and more:
- Automatic standby generator installations
- Panel upgrades
- Circuit upgrades and repair
Contact Us for Heating and Cooling in New Baltimore, MI
In need of a maintenance check, repair or new HVAC system? Contact us today and receive a free quote from our team. If you don’t need us just yet, bookmark this page or take down our number, so you know where to turn when an urgent issue arises.
We can’t wait to meet you and visit your home by Lake St. Clair’s Anchor Bay. Thank you for taking the time to learn more about our team!
Recent Jobs and Reviews in New Baltimore, MI
Job Locations and Reviews
Completed annual cooling maintenance on two outdoor condensing units located against the building exterior. Performed comprehensive system inspection, replaced air filters and evaporative cooler pads on both units, and documented equipment condition with photographs. Both systems operational upon completion.
Completed installation of a 20kW RCA standby generator with 100-amp automatic transfer switch on exterior concrete pad with proper conduit routing along foundation to interior electrical panel. All required permits obtained including mechanical, electrical, generator, gas piping, and pressure testing approvals prior to installation. Installed transfer switch in basement utility area with appropriate wiring connections to main electrical panel, completed gas line installation and pressure testing, and verified proper operation of automatic transfer system upon utility power loss simulation.
Completed annual preventive maintenance on residential RZ cooling system. Inspected outdoor condensing unit, verified proper airflow through coil fins and intake louvers, confirmed unit operational status, and documented equipment condition with photos. No filter replacement required during this service visit.
Responded to water leak complaint caused by frozen condensate line that damaged garage ceiling. Upon inspection, found existing condensate drain line had frozen during winter months, subsequently thawed, and created leak damage requiring ceiling repair. Repaired and reconfigured condensate drainage system to prevent future freezing issues. Installed proper drainage components and secured all connections. Accessed work area through ceiling opening to address damaged section. Tested system operation to ensure proper condensate flow and verified no additional leaks present. Parts and labor applied to complete repair.
Completed comprehensive tune-up on 13-year-old residential air conditioning system. Performed full system diagnostics using refrigerant manifold gauges to verify operating pressures and temperatures, inspected condensing unit exterior components, and confirmed proper system performance. All measurements recorded within acceptable parameters for continued operation.
Completed annual heating and cooling maintenance on gas furnace system. Performed comprehensive tune-up including inspection of heat exchanger, blower motor assembly, gas valve operation, and control board functionality. Verified all electrical connections, tested safety controls, checked gas pressure, and confirmed proper system operation with no deficiencies noted.
Completed comprehensive Air Care Heating and Cooling recurring maintenance service on residential HVAC system. Performed full system inspection with access panel removal, documenting all internal components including blower motor assembly, gas valve controls, heat exchanger, circuit control boards, electrical connections, and safety systems. All components photographed and verified to be in proper working condition with no issues identified during this scheduled maintenance visit.
Responded to recall for no hot water following previous day's installation of 70K BTU furnace, 2-ton air conditioner, and humidifier. Inspected gas water heater connections and venting in utility room, verified proper gas flow and pilot operation. Identified and resolved issue preventing hot water production, tested system for proper function and safety. All equipment operating as designed upon departure.
Responded to water heater emergency in basement utility room where tanked water heater exhibited active leaking from bottom of tank and loud banging noises during operation. Upon arrival, found significant water accumulation across utility room floor with visible pooling and evidence of rust-contaminated water discharge. Performed diagnostic inspection of water heater tank and identified bottom tank failure with internal corrosion causing water leakage directly from tank body. Loud banging noise confirmed as sediment buildup creating steam pockets during heating cycle, indicating advanced deterioration. Documented extensive floor water damage and compromised tank integrity through photographic evidence. Advised that bottom tank leaks are non-repairable due to structural failure of tank vessel and recommended complete water heater replacement as only viable solution. Unit determined to be beyond serviceable condition due to tank rupture and sediment accumulation.
Completed annual cooling maintenance on residential air conditioning system. Performed comprehensive inspection of outdoor condensing unit, including cleaning of condenser coils, verification of refrigerant levels, testing of electrical connections, and assessment of overall system operation. Replaced humidifier pad as part of scheduled maintenance protocol.
Responded to no communication issue between smart thermostat and hub on 2020 HVAC system located in basement. Attempted reboot procedures without success, performed diagnostic troubleshooting on wireless connectivity and network configuration. Verified thermostat display functionality showing 52°F reading, inspected wall-mounted control panel for proper operation and signal transmission to determine root cause of communication failure.
Performed scheduled maintenance on a 20kW Kohler residential standby generator. Completed routine inspection of engine components, oil level verification, and system diagnostics. Installed cold weather kit to ensure reliable cold-start performance during winter months and provided replacement generator key.
Completed annual heating maintenance tune-up on residential furnace system as part of active air care membership. Performed comprehensive inspection of all HVAC components including blower motor assembly, electrical connections, condensate drainage system, and PVC venting. All systems inspected, tested, and verified operational with no deficiencies noted; unit operating within manufacturer specifications.
Completed full HVAC system installation including 70,000 BTU gas furnace with humidifier and 2.5-ton air conditioning unit with rear discharge configuration. Installed new air handler on elevated platform in basement utility area, ran PVC condensate drain lines, and connected refrigerant line set with proper insulation. Mounted electrical disconnect, completed all ductwork connections, and reconnected existing components to new equipment. Obtained mechanical and electrical permits prior to installation. All equipment installed per manufacturer specifications, system tested and operational, with utility rebate applications processed for DTE and SEMCO programs.
Completed full HVAC system installation including 70,000 BTU furnace, 2-ton air conditioning unit with rear placement, and humidifier. Obtained mechanical and electrical permits prior to installation. Installed furnace with proper venting using white PVC piping, connected electrical conduit and wiring, and integrated ductwork with control unit featuring indicator lights. Reconnected all existing utilities and verified system operation. Processed utility rebate documentation for DTE and SEMCO Energy, and coordinated Michigan Saves financing paperwork through electronic signature system.
# HVAC Maintenance - ACM Completed Performed annual preventive maintenance on Lennox outdoor condensing unit. Inspected condenser coils, fan motor, and electrical connections for proper operation. Replaced air filter and evaporative cooling pad as scheduled. Verified refrigerant levels and system pressures within manufacturer specifications. Cleaned debris from around unit base and confirmed adequate airflow through condenser grille. Unit operating normally with no deficiencies noted. All components functioning as designed.
Completed full HVAC system installation including a 90,000 BTU gas furnace and 3-ton air conditioning unit with rear discharge configuration. Installed new PVC venting system properly secured to ceiling joists with appropriate hangers and clamps, routed electrical connections using flexible conduit, and reconnected all utilities. All mechanical and electrical permits obtained, equipment properly positioned in basement utility area, and system tested for proper operation upon completion.
Completed routine air conditioning maintenance on residential condensing unit. Replaced air filter and evaporator pad, performed system inspection, and verified proper operation of all components.
Performed scheduled air conditioning maintenance on residential split system. Checked refrigerant pressures and temperatures using digital manifold gauges, confirming R410A charge levels within manufacturer specifications. Replaced air filters and inspected outdoor condenser unit for proper operation and airflow clearance.
Successfully installed a new 4-ton Lennox air conditioning condenser unit and evaporator coil system. The outdoor condenser was positioned on a concrete pad with proper clearances, connected to electrical disconnect with appropriate conduit routing, and refrigerant lines were run to the indoor coil mounted above the existing furnace. All mechanical, electrical, and refrigeration connections were completed per manufacturer specifications, system was charged with refrigerant, tested for proper operation, and left running efficiently.