Clinton Township Service Overview
- Local Priority: Serving the Hall Road (M-59) corridor and neighborhoods near Partridge Creek every single day.
- Certified Expertise: Expert technicians who understand the distinct technical needs of Clinton Township’s varied home ages.
- Efficiency Focus: Specialized in high-efficiency systems that manage the specific climate demands of Macomb County.
“I was contacted by Randazzo for a maintenance check on my furnace that they installed. The service technician was professional and friendly. He answered my questions and even changed my furnace filter. Overall, I didn’t expect the call but it was much appreciated.”
Electrical Upgrades & Backup Power
Power demand in Clinton Township has increased significantly, especially in homes near the Partridge Creek area. Between modern appliances and EV chargers, older electrical panels often fall behind. We provide reliable solutions that keep your home running without interruption.
- Generator Installation: Authorized Generac and Kohler services.
- Panel Upgrades: Modernizing systems for today’s high-demand appliances.
- EV Charger Installation: Professional setups for home charging stations.
- Surge Protection: Whole-home protection against local grid spikes.
Furnace Repair & Heating System Work
Heating systems in neighborhoods tied to Chippewa Valley Schools take a heavy beating during Michigan winters. We often find that older furnaces lose efficiency over time, leading to higher energy bills and uneven heat. We correct these issues so your system runs reliably when you need it most.
- Heating Repair: Fast diagnostics for furnaces and heat pumps.
- System Replacement: Energy-efficient upgrades for older township homes.
- Seasonal Maintenance: Precision tuning to prevent winter breakdowns.
“Randazzo is my first choice for install and service. 25 years in my home and they have been there for me all along. Very professional and knowledgeable. On time and had my system running perfectly.”
Air Conditioning & Water Systems
Cooling in Clinton Township often comes down to airflow. Larger homes and finished basements require properly balanced systems to stay comfortable. Additionally, we specialize in sump pump services to protect your finished lower levels from the flooding risks common to our area.
- AC Troubleshooting: Solving uneven cooling and airflow issues.
- Sump Pump Service: Protecting basements with reliable backup systems.
- Water Heaters: Repairs and high-efficiency tankless upgrades.
Solving Clinton Township Home Issues
Problem: Residents near Hall Road often experience electrical panel tripping due to the high power demand of modern home technology.
Solution: We perform comprehensive panel upgrades and dedicated circuit installations to ensure your home can handle modern loads safely.
Problem: Homeowners frequently report that their furnace runs constantly but fails to provide even warmth in every room.
Solution: We recalibrate your heating system and seal ductwork to optimize airflow and lower your monthly energy expenses.
Problem: Finished basements in Clinton Township are at high risk of damage if the primary sump pump fails during a heavy rainstorm.
Solution: We install professional-grade battery backup pumps that automatically take over to keep your basement dry, even when the power is out.
“Everything went great and all is working as it should be. I am really impressed with the service and professionalism.”
Why Clinton Township Chooses Randazzo
We prioritize reliability over quick fixes, ensuring your home systems run without disruption.
- Local Experts: We understand the specific climate and home patterns across Macomb County.
- Fast Response: Our teams are already in Clinton Township and along Hall Road every day.
- Comprehensive Care: One trusted company for HVAC, electrical, and plumbing needs.
- Transparent Fixes: Technicians who explain the problem and the solution clearly.
Do you provide service near The Mall at Partridge Creek?
Can you help with an electrical panel upgrade?
Are your technicians certified for furnace repairs?
Recent Jobs and Reviews in Clinton Township, MI
Job Locations and Reviews
Completed comprehensive spring maintenance inspection on residential HVAC system following winter season. Performed full AC tune-up on 10-year-old unit, inspecting blower motor assembly, electrical connections, gas line connections, burner assembly, and heat exchanger components. Verified all wiring connections secure, including control wiring and safety circuits. Inspected inducer motor assembly, condensate drain lines, and PVC venting system for proper operation. System tested and confirmed operational with no issues found; unit ready for upcoming cooling season.
Conducted comprehensive site evaluation for new central air conditioning system installation at single-family residence currently equipped with boiler heating only. Assessed existing electrical service panel in basement utility area, confirming adequate circuit breaker capacity and panel condition for AC system integration. Evaluated basement mechanical space layout, noting available clearances around existing laundry appliances and ductwork routing options from current heating system. Documented electrical infrastructure, mechanical room dimensions, and potential equipment placement locations. Provided estimate for complete central AC installation including outdoor condensing unit, indoor air handler, refrigerant lines, electrical connections, and integration with existing duct system where applicable.
Completed annual HVAC maintenance on residential heating and cooling system. Performed comprehensive inspection of indoor furnace unit, examining blower motor, capacitor, electrical connections, and filter system. Serviced outdoor condensing unit, checking refrigerant levels with manifold gauges, inspecting fan operation, and verifying proper electrical disconnect function. All components found operating within normal parameters with no repairs required at this time.
Completed annual HVAC maintenance on residential system with two furnaces. Replaced two furnace filters and installed two new humidifier pads as part of routine preventive maintenance. Inspected outdoor air conditioning condenser unit, verified proper operation and clearances around equipment. All components functioning within normal parameters upon completion of service.
Completed installation of 50-gallon tanked water heater with ICON System control unit. Reconnected all water supply lines, configured B-vent exhaust system, and established proper gas connections. Unit was tested for proper operation, temperature controls calibrated, and all safety features verified functional.
Completed annual cooling maintenance on residential split system air conditioning unit. Performed comprehensive inspection of outdoor condenser unit, which exhibited heavy accumulation of dirt, dust, and debris on exterior cabinet surfaces. Cleaned condenser coils, checked refrigerant lines, verified electrical connections at disconnect box, and tested system operation to ensure proper cooling performance for upcoming season.
Conducted on-site assessment and documentation of existing residential water heater installation in utility room. Photographed current white cylindrical water heater unit with all associated plumbing connections, including copper supply lines, brass valves, gray PVC piping, and safety components. Documented equipment condition, surrounding mechanical systems, and installation configuration to provide comprehensive estimate for water heater replacement.
Conducted estimate for complete air conditioning system replacement. Existing outdoor condenser unit is approximately 30 years old, dating back to 1990s installation, showing significant age-related wear and deterioration. Indoor furnace system with attached humidifier located in basement utility area exhibits moisture damage evidenced by white mineral deposits and efflorescence streaking down unit sides. Evaluated current system configuration including ductwork connections, electrical service, and equipment placement. Documented equipment conditions through photographic assessment of both indoor and outdoor components. Provided recommendations for new AC system installation to replace aging equipment that has exceeded typical service life expectancy.
Completed annual heating maintenance and tune-up on residential furnace system as part of membership program. Performed comprehensive inspection of furnace unit with access panel removed to evaluate blower motor, electrical connections, and internal components. All wiring connections, including red, white, yellow, and black conductors, were inspected and found secure. Blower motor assembly, terminal blocks, and safety controls verified operational. System found in proper working condition with no issues identified.
Conducted site evaluation for replacement of 30-year-old air conditioning system in residential basement mechanical room. Assessed existing HVAC equipment configuration, including furnace with PVC exhaust venting, water heater, and associated copper piping and ductwork. Documented current system layout and utility connections to prepare comprehensive replacement estimate for complete air conditioning unit installation.
Completed installation of 2-ton air conditioning system with matching evaporator coil. Installed outdoor condenser unit on deck-mounted pad with proper electrical disconnect and reconnected to existing furnace system in basement. System positioned in rear location with refrigerant lines run between indoor and outdoor components. Verified all electrical connections, tested system operation, and ensured proper airflow through new coil integrated with existing ductwork. Installation completed per mechanical permit specifications with all components functioning within manufacturer specifications.
Completed comprehensive full system estimate for residential HVAC replacement. Evaluated existing 16-year-old furnace located in basement mechanical room and 16-year-old air conditioning condenser unit positioned on exterior pad against brick foundation. Documented current equipment condition, assessed ductwork configuration including flex connections and insulated supply runs, and photographed both indoor and outdoor components to provide accurate replacement recommendations for customer seeking seasonal system upgrade.
Conducted on-site assessment for complete HVAC system replacement in above-ground basement location. Existing 20-year-old natural gas furnace and air conditioning system were non-operational and required full replacement. Evaluated current equipment configuration including gas furnace unit, associated PVC condensate drainage system, refrigerant line sets, electrical connections, and ductwork installation within exposed basement utility area. Documented existing system layout with furnace positioned on concrete floor with wooden platform support structure, multiple PVC drain lines, copper refrigerant tubing, gas valve assembly, and integration with water heating equipment. Assessed installation environment including foundation walls, exposed ceiling joists, existing ductwork routing, and available space for new equipment placement. Provided comprehensive replacement estimate for new high-efficiency air conditioning and natural gas furnace system to restore climate control functionality.
Completed annual cooling maintenance on rooftop-mounted Lennox HVAC unit. Performed standard ACM inspection, verified system operation, and documented equipment condition with photographs showing normal wear and dust accumulation on outdoor components.
Responded to callback for furnace blower running continuously and intermittently blowing cold air. Performed diagnostic testing on outdoor HVAC unit using Fieldpiece digital analyzer to measure system pressures, temperatures, and electrical values. Connected manifold gauges with refrigerant hoses to service ports to verify system operation and resolve ongoing issue from previous service visits.
Provided comprehensive estimate for complete HVAC system replacement including natural gas furnace and air conditioning unit for 45-year-old equipment located in basement. Assessed existing beige furnace cabinet and outdoor condenser units positioned against exterior brick wall, documented current system configuration including ductwork, electrical connections, and clearances. Presented replacement options to occupant for both heating and cooling equipment to address aging system concerns.
Conducted comprehensive site assessment for HVAC system replacement at residential property with 16-year-old air conditioning unit requiring replacement within the next couple of weeks. Evaluated existing furnace installation in basement utility space and exterior AC condenser unit positioned on concrete pad adjacent to patio area. Documented current equipment configuration, ductwork connections, and electrical service to provide accurate replacement system specifications and installation requirements for complete cooling system upgrade.
Conducted comprehensive site assessment for electric vehicle charging station installation at residential property. Evaluated existing electrical infrastructure, including main service panel in basement utility area, to determine capacity and compatibility for Level 2 EV charger installation. Assessed optimal exterior mounting location near entry point with consideration for conduit routing from electrical panel to proposed charging station position, documented current electrical system configuration, and provided detailed estimate for complete installation including required materials and labor.
Responded to service call for thermostat not reaching set temperature of 78°F and stopping at 70°F. Performed diagnostic testing of HVAC system using dual port manometer to measure system pressures, which indicated readings of 350 and 359 on P1 and P2 ports respectively. Identified and resolved system issue preventing proper temperature control, restoring normal thermostat operation to achieve desired set point.
Completed annual HVAC maintenance as part of membership program on 10-year-old furnace system. Performed comprehensive tune-up including inspection of outdoor condenser unit, refrigerant pressure testing using manifold gauges on all service ports, and system diagnostics. Unit operating within normal parameters with no issues found or repairs needed at time of service.